XIO2001IPNP datasheet(79/141 Pages) TI1

79 / 141 page

XIO2001

www.ti.com

SCPS212I – MAY 2009 – REVISED JANUARY 2016

Product Folder Links: XIO2001

Submit Documentation Feedback

Table 49. General Control Register Description (continued)

BIT

FIELD NAME

ACCESS

DESCRIPTION

9:8(1)

MIN_POWER_S

CALE

Minimum power scale. This value is programmed to indicate the scale of bits 7:0

(MIN_POWER_VALUE).

00 =

01 =

10 =

11 =

1.0x

0.1x

0.01x (default)

0.001x

7:0(1)

MIN_POWER_VA

LUE

Minimum power value. This value is programmed to indicate the minimum power requirements.

This value is multiplied by the minimum power scale field (bits 9:8) to determine the minimum

power requirements for the bridge. The default is 5Fh, indicating that the bridge requires 0.95 W

of power. This field can be reprogrammed through an EEPROM or the system BIOS.

8.4.67 Clock Control Register

This register enables and disables the PCI clock outputs (CLKOUT). See Table 50 for a complete description of

the register contents.

PCI register offset:

D8h

Read-only, Read/Write

Default value:

00h

BIT NUMBER

RESET STATE

(1)

These bits are reset by a PCI Express reset (PERST), a GRST, or the internally-generated power-on reset.

Table 50. Clock Control Register Description

BIT

FIELD NAME

ACCESS

DESCRIPTION

7(1)

RSVD

Reserved. Returns 0b when read.

6(1)

CLOCK6_DISABLE

Clock output 6 disable. This bit disables secondary CLKOUT6.

0 = Clock enabled (default)

1 = Clock disabled

5(1)

CLOCK5_DISABLE

Clock output 5 disable. This bit disables secondary CLKOUT5.

0 = Clock enabled (default)

1 = Clock disabled

4(1)

CLOCK4_DISABLE

Clock output 4 disable. This bit disables secondary CLKOUT4.

0 = Clock enabled (default)

1 = Clock disabled

3(1)

CLOCK3_DISABLE

Clock output 3 disable. This bit disables secondary CLKOUT3.

0 = Clock enabled (default)

1 = Clock disabled

2(1)

CLOCK2_DISABLE

Clock output 2 disable. This bit disables secondary CLKOUT2.

0 = Clock enabled (default)

1 = Clock disabled

1(1)

CLOCK1_DISABLE

Clock output 1 disable. This bit disables secondary CLKOUT1.

0 = Clock enabled (default)

1 = Clock disabled

0(1)

CLOCK0_DISABLE

Clock output 0 disable. This bit disables secondary CLKOUT0.

0 = Clock enabled (default)

1 = Clock disabled

XIO2001IPNP bảng dữ liệu(PDF) 79 Page - Texas Instruments

XIO2001IPNP bảng dữ liệu(HTML) 79 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

bảng dữ liệu tải về

Link URL