AN4031 datasheet(23/36 Pages) STMICROELECTRONICS

tên linh kiện	AN4031

Giải thích chi tiết về linh kiện	Using the STM32F2 and STM32F4 DMA controller

PDF	36 Pages

Scroll/Zoom	100%

nhà sản xuất	STMICROELECTRONICS [STMicroelectronics]

Trang chủ	http://www.st.com

Logo

23 / 36 page

DocID022648 Rev 1

23/36

AN4031

System performance considerations

2.2.2

DMA transfer states

This section explains the DMA transfer steps at the peripheral port level and also at the

memory port level:

•

For a peripheral-to-memory transfer:

In this transfer mode, DMA requires two bus accesses to perform the transfer:

–

One access over the peripheral port triggered by the peripheral’s request,

–

One access over the memory port which can be triggered either by the FIFO

threshold (when FIFO mode is used) or immediately after peripheral read (when

Direct mode is used).

Figure 12. Peripheral-to-memory transfer states

•

For a memory-to-peripheral transfer:

In this transfer mode, DMA requires two bus accesses to perform the transfer:

–

DMA anticipates the peripheral’s access and reads data from the memory and

stores it in FIFO to ensure an immediate data transfer as soon as a DMA

peripheral request is triggered.

–

When a peripheral request is triggered, a transfer is generated on the DMA

peripheral port.

AN4031 bảng dữ liệu(PDF) 23 Page - STMicroelectronics