AN1014 datasheet(17/25 Pages) STMICROELECTRONICS

17 / 25 page

17/25

HOW TO MINIMIZE THE ST7 POWER CONSUMPTION

7.1.2.1 Run Mode

Methodology: An external CLK source, up to 16MHz is used on pin CLKIN. PLL is disabled

and internal RC Oscillator is OFF. So, fOSC is CLKIN / 2. All peripherals are in reset configura-

tion except the I/O Ports. At reset the SMS bit in the MCCSR is 0, hence fCPU is fOSC. All Ports

are in Push-Pull Outputs with low level.

Measurements:

Table 12. Consumption IDD (RUN Mode) at TA = + 25 °C

7.1.2.2 Slow Mode

Methodology: An external CLK source, up to 16MHz is used on pin CLKIN. PLL is disabled

and internal RC Oscillator is OFF. So, fOSC is CLKIN / 2. All peripherals are in reset configura-

tion except the I/O Ports and the SMS bit in the MCCSR is set to 1, hence fCPU is fOSC/32. All

Ports are in Push-Pull Outputs with low level.

Measurements:

Table 13. Consumption IDD (SLOW Mode) at TA = + 25 °C

External CLK

on CLKIN Pin

(MHz)

fCPU(MHz)

IDD at VDD = 4.5 V

IDD at VDD = 5 V

IDD at VDD = 5.5 V

4.5 mA

5.17 mA

5.86 mA

2.32 mA

2.68 mA

3.07 mA

External CLK

on CLKIN Pin

(MHz)

fCPU(MHz)

IDD at VDD = 4.5 V

IDD at VDD = 5 V

IDD at VDD = 5.5 V

0.25

417

µA490 µA

571

µA

80.125

274

µA320 µA

372

µA

0.03125

142

µA161 µA

192

µA

AN1014 bảng dữ liệu(PDF) 17 Page - STMicroelectronics

AN1014 bảng dữ liệu(HTML) 17 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25

bảng dữ liệu tải về

Link URL