UM0969 datasheet(18/46 Pages) STMICROELECTRONICS

18 / 46 page

Hardware setting of the STEVAL-IHM027V1

UM0969

18/46

Doc ID 17665 Rev 2

Hardware setting of the STEVAL-IHM027V1

The STEVAL-IHM027V1 demonstration board can be driven through the J3 motor connector

by various control units released by STMicroelectronics. The demonstration board is

suitable for field oriented control as well as for tachometer or Hall sensor closed-loop

control. The STEVAL-IHM027V1 demonstration board ideally fits with the

STMicroelectronics' released STM3210B-EVAL board, based on the STM32 MCU family, as

the control unit for FOC driving algorithms.

3.1

Hardware settings with single-shunt configuration

To drive any high PMSM or AC induction motor, the user must ensure that:

●

The motor control demonstration board is driven by a control board that provides six

output signals required to drive the 3-phase power stage

●

The motor is connected to J2 motor output connector

●

If using an encoder or Hall sensor, connect it to J1

●

If using a tachometer sensor, connect it to J24

●

If using the brake control feature, connect a dummy load to J4

Table 3

shows jumper settings for any motors. Please be sure that the input voltage (mains

voltage) of the demonstration board is: from 90 VAC to 220 VAC or from 125 VDC to 350

VDC.

Table 3.

Jumper settings for single-shunt configuration

Jumper

Settings for single-shunt configuration

HV PMSM motor

Generic AC motor with tachometer

Present

Not present

Present

Not present

B position for single-shunt

B position to supply Hall sensor\encoder

with +5 VCD

B position to supply Hall sensor\encoder

with +5 VCD

Not present

Present

Not present

Present

User defined

W10

User defined

W11

User defined

W12

B position for single-shunt

W13

B position for single-shunt

W14

User defined

UM0969 bảng dữ liệu(PDF) 18 Page - STMicroelectronics

UM0969 bảng dữ liệu(HTML) 18 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46

bảng dữ liệu tải về

Link URL