Soldering and Mounting

Do not clean VFR3V, PLT09H and VFS6V series.

Clean other parts in the following conditions.

(1) Cleaning temperature should be limited to 60°C max.

(40°C max for alcohol type cleaner).

(2) Ultrasonic cleaning should comply with the following

conditions, avoiding the resonance phenomenon at the

mounted products and PCB.

Power: 20 W /

Rmax. Frequency: 28 to 40kHz

Time: 5 min. max.

(3) Cleaner

(a) Alcohol type cleaner

Isopropyl alcohol (IPA)

(b) Aqueous agent (PLT series cannot be cleaned)

PINE ALPHA ST-100S

(4) There should be no residual flux or residual cleaner left

after cleaning.

In the case of using aqueous agent, products should be

dried completely after rinsing with de-ionized water in

order to remove the cleaner.

(5) The surface of products may become dirty after cleaning,

but there is no deterioration on mechanical, electrical

characteristics and reliability.

(6) Other cleaning: Please contact us.

3. Cleaning Conditions

Continued from the preceding page.

34

• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.