LM4935RLEVAL datasheet(2/91 Pages) TI1

2 / 91 page

LM4935, LM4935RLEVAL

SNAS296D – OCTOBER 2005 – REVISED MARCH 2006

www.ti.com

1.3

Description

The LM4935 is an integrated audio subsystem that supports both analog and digital audio functions. The

LM4935 includes a high quality stereo DAC, a mono ADC, a multi-purpose SAR ADC, a stereo

headphone amplifier, which supports output cap-less (OCL) or AC-coupled (SE)modes of operation, a

mono earpiece amplifier and a mono high efficiency loudspeaker amplifier. It is designed for demanding

applications in mobile phones and other portable devices.

The LM4935 features a bi-directional I2S serial interface for full range audio and an I2C or SPI compatible

interface for control. The stereo DAC path features an SNR of 88 dB with an 18-bit 48 kHz input. In SE

mode the headphone amplifier delivers at least 33 mWRMS to a 32Ω single-ended stereo load with less

than 1% distortion (THD+N) when A_VDD = 3.3V. The mono earpiece amplifier delivers at least 115

mWRMS to a 32Ω bridged-tied load with less than 1% distortion (THD+N) when A_VDD = 3.3V. The mono

speaker amplifier delivers up to 600 mW into an 8

Ω load with less than 1% distortion when LS_VDD = 3.3V

and up to 1.3W when LS_VDD = 5.0V. The LM4935 also contains a general purpose SAR ADC for

housekeeping duties such as battery and temperature monitoring. This can also be used for analog

volume control of the output stages and can trigger interrupt events.

The LM4935 employs advanced techniques to reduce power consumption, to reduce controller overhead

to speed development time and to eliminate click and pop. Boomer audio power amplifiers were designed

specifically to provide high quality output power with a minimal amount of external components. It is

therefore ideally suited for mobile phone and other low voltage applications where minimal power

consumption, PCB area and cost are primary requirements.

1.4

Key Specifications

Table 1-1.

VALUE

UNIT

PHP (AC-COUP) @ A_VDD = 3.3V, 32Ω, 1% THD

PHP (OCL) @ A_VDD = 3.3V, 32Ω, 1% THD

PLS @ LS_VDD = 5V, 8Ω, 1% THD

1.3

PLS @ LS_VDD = 4.2V, 8Ω, 1% THD

900

BB_VDD = 1.8V to 4.5V,

Supply Voltage Range

D_VDD & PLL_VDD = 2.7V to 4.5V

LS_VDD & A_VDD = 2.7V to 5.5V

PLS @ LS_VDD = 3.3V, 8Ω, 1% THD

600

Shutdown Current

1.1

µA

PSRR @ 217 Hz, A_VDD = 3.3V, (Headphone)

SNR (Stereo DAC to AUXOUT)

dB (typ)

SNR (Mono ADC from Cell Phone In)

dB (typ)

SNR (Aux In to Headphones)

dB (typ)

1 Introduction

Submit Documentation Feedback

Product Folder Links: LM4935 LM4935RLEVAL

LM4935RLEVAL bảng dữ liệu(PDF) 2 Page - Texas Instruments

LM4935RLEVAL bảng dữ liệu(HTML) 2 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91

bảng dữ liệu tải về

Link URL