IO96NDB2V1 datasheet(18/242 Pages) MICROSEMI

18 / 242 page

ProASIC3L DC and Switching Characteristics

2-2

Revision 13

Table 2-2 •

Recommended Operating Conditions 1

Symbol

Parameter

Commercial

Industrial

Units

Ambient temperature

0 to +70

–40 to +85

°C

Junction Temperature

0 to + 85

–40 to +100

°C

VCC 2

1.2 V–1.5 V wide range core voltage 3

1.14 to 1.575

VJTAG

JTAG DC voltage

1.4 to 3.6

VPUMP 5

Programming voltage

Programming Mode 4

3.15 to 3.45

Operation 5

0 to 3.6

VCCPLL 6

Analog power supply (PLL)

1.2 V–1.5 V wide range

core voltage 3

1.14 to 1.575

VCCI

and

VMV 7

1.2 V DC supply voltage8

1.14 to 1.26

1.5 V DC supply voltage

1.425 to 1.575

1.8 V DC supply voltage

1.7 to 1.9

2.5 V DC supply voltage

2.3 to 2.7

3.3 V wide range DC supply voltage9

2.7 to 3.6

3.3 V DC supply voltage

3.0 to 3.6

LVDS differential I/O

2.375 to 2.625

LVPECL differential I/O

3.0 to 3.6

Notes:

1. All parameters representing voltages are measured with respect to GND unless otherwise specified.

2. The ranges given here are for power supplies only. The recommended input voltage ranges specific to each I/O

standard are given in Table 2-14 on page 2-10. VCCI should be at the same voltage within a given I/O bank.

3. All ProASIC3L devices must be programmed with the VCC core voltage at 1.5 V.

4. The programming temperature range supported is Tambient = 0°C to 85°C.

5. VPUMP can be left floating during normal operation (not programming mode).

6. VCCPLL pins should be tied to VCC pins. See the "VCCPLA/B/C/D/E/F PLL Supply Voltage" section on page 3-1 for

further information.

7. VMV pins must be connected to the corresponding VCCI pins. See the "VMVx I/O Supply Voltage (quiet)" section on

page 3-1 for further information.

8. For ProASIC®3L devices, VCCI

VCC.

9. 3.3 V wide range is compliant to the JESD8-A specification and supports 3.0 V VCCI operation.

Table 2-3 •

Flash Programming Limits – Retention, Storage, and Operating Temperature1

Product

Grade

Programming

Cycles

Program Retention

(biased/unbiased)

Maximum Storage

Temperature TSTG (°C) 2

Maximum Operating

Junction Temperature TJ (°C) 2

Commercial

500

20 years

110

100

Industrial

500

20 years

110

100

Notes:

1. This is a stress rating only; functional operation at any condition other than those indicated is not implied.

2. These limits apply for program/data retention only. Refer to Table 2-1 on page 2-1 and Table 2-2 for device operating

conditions and absolute limits.

IO96NDB2V1 bảng dữ liệu(PDF) 18 Page - Microsemi Corporation

IO96NDB2V1 bảng dữ liệu(HTML) 18 Page - Microsemi Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

bảng dữ liệu tải về

Link URL