| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
PIC24FJ128GA310 bảng dữ liệu(PDF) 223 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
PIC24FJ128GA310 bảng dữ liệu(HTML) 223 Page - Microchip Technology |
|
223 / 406 page ![]() 2010-2011 Microchip Technology Inc. DS39996F-page 223 PIC24FJ128GA310 FAMILY To set up the SPI module for the Enhanced Buffer Master mode of operation: 1. If using interrupts: a) Clear the SPIxIF bit in the respective IFS register. b) Set the SPIxIE bit in the respective IEC register. c) Write the SPIxIP bits in the respective IPC register. 2. Write the desired settings to the SPIxCON1 and SPIxCON2 registers with MSTEN (SPIxCON1<5>) = 1. 3. Clear the SPIROV bit (SPIxSTAT<6>). 4. Select Enhanced Buffer mode by setting the SPIBEN bit (SPIxCON2<0>). 5. Enable SPI operation by setting the SPIEN bit (SPIxSTAT<15>). 6. Write the data to be transmitted to the SPIxBUF register. Transmission (and reception) will start as soon as data is written to the SPIxBUF register. To set up the SPI module for the Enhanced Buffer Slave mode of operation: 1. Clear the SPIxBUF register. 2. If using interrupts: a) Clear the SPIxIF bit in the respective IFS register. b) Set the SPIxIE bit in the respective IEC register. c) Write the SPIxIP bits in the respective IPC register to set the interrupt priority. 3. Write the desired settings to the SPIxCON1 and SPIxCON2 registers with MSTEN (SPIxCON1<5>) = 0. 4. Clear the SMP bit. 5. If the CKE bit is set, then the SSEN bit must be set, thus enabling the SSx pin. 6. Clear the SPIROV bit (SPIxSTAT<6>). 7. Select Enhanced Buffer mode by setting the SPIBEN bit (SPIxCON2<0>). 8. Enable SPI operation by setting the SPIEN bit (SPIxSTAT<15>). FIGURE 16-2: SPIx MODULE BLOCK DIAGRAM (ENHANCED MODE) Internal Data Bus SDIx SDOx SSx/FSYNCx SCKx SPIxSR bit 0 Shift Control Edge Select FCY Enable Sync Clock Control SPIXBUF Control Transfer Transfer Write SPIxBUF Read SPIxBUF 16 SPIxCON1<1:0> SPIxCON1<4:2> Master Clock 8-Level FIFO Receive Buffer 8-Level FIFO Transmit Buffer Primary 1:1/4/16/64 Prescaler Secondary Prescaler 1:1 to 1:8 |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |