W25Q32FVZPIP datasheet(29/99 Pages) WINBOND

29 / 99 page

W25Q32FV

Publication Release Date: Sept 16,, 2013

- 28 -

Revision H

Notes:

Data bytes are shifted with Most Significant Bit first. Byte fields with data in parenthesis “( )” indicate data

output from the device on either 1, 2 or 4 IO pins.

The Status Register contents and Device ID will repeat continuously until /CS terminates the instruction.

At least one byte of data input is required for Page Program, Quad Page Program and Program Security

Registers, up to 256 bytes of data input. If more than 256 bytes of data are sent to the device, the

addressing will wrap to the beginning of the page and overwrite previously sent data.

Write Status Register-1 (01h) can also be used to program Status Register-1&2, see section 8.2.5.

Security Register Address:

Security Register 1: A23-16 = 00h; A15-8 = 10h; A7-0 = byte address

Security Register 2: A23-16 = 00h; A15-8 = 20h; A7-0 = byte address

Security Register 3: A23-16 = 00h; A15-8 = 30h; A7-0 = byte address

Dual SPI address input format:

IO0 = A22, A20, A18, A16, A14, A12, A10, A8

A6, A4, A2, A0, M6, M4, M2, M0

IO1 = A23, A21, A19, A17, A15, A13, A11, A9

A7, A5, A3, A1, M7, M5, M3, M1

Dual SPI data output format:

IO0 = (D6, D4, D2, D0)

IO1 = (D7, D5, D3, D1)

Quad SPI address input format:

Set Burst with Wrap input format:

IO0 = A20, A16, A12, A8,

A4, A0, M4, M0

IO0 = x, x, x, x, x, x, W4, x

IO1 = A21, A17, A13, A9,

A5, A1, M5, M1

IO1 = x, x, x, x, x, x, W5, x

IO2 = A22, A18, A14, A10, A6, A2, M6, M2

IO2 = x, x, x, x, x, x, W6, x

IO3 = A23, A19, A15, A11, A7, A3, M7, M3

IO3 = x, x, x, x, x, x, x,

Quad SPI data input/output format:

IO0 = (D4, D0, …..)

IO1 = (D5, D1, …..)

IO2 = (D6, D2, …..)

IO3 = (D7, D3, …..)

10. Fast Read Quad I/O data output format:

IO0 = (x, x, x, x, D4, D0, D4, D0)

IO1 = (x, x, x, x, D5, D1, D5, D1)

IO2 = (x, x, x, x, D6, D2, D6, D2)

IO3 = (x, x, x, x, D7, D3, D7, D3)

11. Word Read Quad I/O data output format:

IO0 = (x, x, D4, D0, D4, D0, D4, D0)

IO1 = (x, x, D5, D1, D5, D1, D5, D1)

IO2 = (x, x, D6, D2, D6, D2, D6, D2)

IO3 = (x, x, D7, D3, D7, D3, D7, D3)

12. For Word Read Quad I/O, the lowest address bit must be 0. (A0 = 0)

13. For Octal Word Read Quad I/O, the lowest four address bits must be 0. (A3, A2, A1, A0 = 0)

14. QPI Command, Address, Data input/output format:

CLK # 0

10 11

IO0 = C4, C0,

A20, A16,

A12, A8,

A4, A0,

D4, D0,

D4, D0

IO1 = C5, C1,

A21, A17,

A13, A9,

A5, A1,

D5, D1,

D5, D1

IO2 = C6, C2,

A22, A18,

A14, A10,

A6, A2,

D6, D2,

D6, D2

IO3 = C7, C3,

A23, A19,

A15, A11,

A7, A3,

D7, D3,

D7, D3

15. The number of dummy clocks for QPI Fast Read, QPI Fast Read Quad I/O & QPI Burst Read with Wrap is

controlled by read parameter P7 – P4.

16. The wrap around length for QPI Burst Read with Wrap is controlled by read parameter P3 – P0.

W25Q32FVZPIP bảng dữ liệu(PDF) 29 Page - Winbond

W25Q32FVZPIP bảng dữ liệu(HTML) 29 Page - Winbond

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99

bảng dữ liệu tải về

Link URL