!Caution

(2) Example of a suitable machine

An outline of a printed circuit board cropping

machine is shown as follows. Along the lines with

the V-grooves on printed circuit board, the top

and bottom blades are aligned to one another

when cropping the board.

The misalignment of the position between top and

bottom blades may cause the capacitor to crack.

Continued from the preceding page.

V-groove

Printed Circuit Board

[Outline of Machine]

[Principle of Operation]

[Cross-section Diagram]

Top Blade

Top Blade

Bottom Blade

Bottom Blade

Top Blade

Bottom Blade

Top Blade

Bottom Blade

Top Blade

Bottom Blade

Top Blade

Printed Circuit Board

V-groove

Recommended

Not Recommended

Top-bottom Misalignment

Left-right Misalignment

Front-rear Misalignment

!Caution (Soldering and Mounting)

32

1

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

C03E.pdf

10.5.20