| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
STM8T143 bảng dữ liệu(PDF) 46 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STM8T143 bảng dữ liệu(HTML) 46 Page - STMicroelectronics |
|
46 / 65 page ![]() Electrical characteristics STM8T143 46/65 DocID18315 Rev 6 9.7.4 Absolute maximum ratings (electrical sensitivity) Based on two different tests (ESD and LU) using specific measurement methods, the product is stressed in order to determine its performance in terms of electrical sensitivity. For more details, refer to the application note AN1181. 9.7.5 Electrostatic discharge (ESD) Electrostatic discharges (3 positive then 3 negative pulses separated by 1 second) are applied to the pins of each sample according to each pin combination. The sample size depends on the number of supply pins in the device (3 parts*(n+1) supply pin). This test conforms to the JESD22-A114A/A115A standard. For more details, refer to the application note AN1181. M 9.7.6 Static latchup Two complementary static tests are required on 10 parts to assess the latchup performance. • A supply overvoltage (applied to each power supply pin) and • A current injection (applied to each input, output and configurable I/O pin) are performed on each sample. This test conforms to the EIA/JESD 78 IC latchup standard. For more details, refer to application note AN1181. Table 23. ESD absolute maximum ratings Symbol Ratings Conditions Class Maximum value(1) 1. Data based on characterization results, not tested in production Unit VESD(HBM) Electrostatic discharge voltage (Human body model) TA = +25°C, conforming to JESD22-A114 3A 4 kV VESD(CDM) Electrostatic discharge voltage (Charge device model) TA = +25°C, conforming to JESD22-C101 IV 1 Table 24. Electrical sensitivities Symbol Parameter Conditions Class(1) 1. Class description: A class is an STMicroelectronics internal specification. All its limits are higher than the JEDEC specifications, that means when a device belongs to class A it exceeds the JEDEC standard. Class B strictly covers all the JEDEC criteria (international standard). LU Static latchup TA = +25 °C A TA = +85 °C |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |