STM32F102XB datasheet(75/76 Pages) STMICROELECTRONICS

75 / 76 page

STM32F102x8, STM32F102xB

Revision history

Doc ID 15056 Rev 4

75/76

27-Sep-2012

Figure 2: Clock tree: added FLITFCLK and Note 3., and modified Note 1..

Updated Note 2. in Table 39: I2C characteristics.

Updated Figure 25: Recommended NRST pin protection.

Changed tw(SCKH) to tw(SCLH), tw(SCKL) to tw(SCLL), tr(SCK) to tr(SCL), tf(SCK)

to tf(SCL), and tsu(STA:STO) to tw(STO:STA) in Figure 26: I2C bus AC

waveforms and measurement circuit(1).

Changed note for Ilkg and RPU and updated Note 1.content in Table 34:

I/O static characteristics. Updated text related to CMOS and TTL

compliance and added Figure 20, Figure 21, Figure 22, and Figure 23.

Updated Section : Output driving current.

In Table 41: SPI characteristics, removed note 1 related to SPI1

remapped characteristics.

Added DuCy(HSI) in Table 23: HSI oscillator characteristics.

Table 22: LSE oscillator characteristics (fLSE = 32.768 kHz): removed

note 2 related to oscillator selection, updated Note 2., and tSU(LSE)

specified for various ambient temperature values.

Updated Note 2. and Note 3. below Figure 35: Recommended footprint

(dimensions in mm)(1)(2)(3).

Table 35: Output voltage characteristics: updated VOL and VOH

conditions for TTL and CMOS outputs and added Note 2..

Replaced “TBD” by “-” for “max” specification of “Supply current in

Standby mode” in Table 15: Typical and maximum current consumptions

in Stop and Standby modes.

Removed “except for analog inputs” from paragraph “GPIOS (general-

purpose inputs/outputs) in Chapter 2.3: Overview.

Updated tw(HSE) min value in Table 19: High-speed external user clock

characteristics.

Added Note 2. in Table 5: Voltage characteristics.

Updated Note 3., Note 4. and Note 5. in Table 6: Current characteristics.

Updated Note 1. in Table 36: I/O AC characteristics.

Added Chapter 5.3.12: I/O current injection characteristics.

Updated Note 2. in Table 39: I2C characteristics.

Updated “Output driving current” paragraph in Chapter 5.3.13: I/O port

characteristics.

Updated Note:

Removed Note 4 and updated Note 3. in Table 39: I2C characteristics.

Updated Figure 29: SPI timing diagram - master mode(1) (SCK Output

instead of Input).

Replaced every occurrence of USBDP or USBDM by USB_DP or

USB_DM, respectively.

Table 55.

Document revision history (continued)

Date

Revision

Changes

STM32F102xB bảng dữ liệu(PDF) 75 Page - STMicroelectronics

STM32F102xB bảng dữ liệu(HTML) 75 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76

bảng dữ liệu tải về

Link URL