| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
XIO2001IPNP bảng dữ liệu(PDF) 69 Page - Texas Instruments |
|
|
|
|||||||||||||||||||||||||||||
XIO2001IPNP bảng dữ liệu(HTML) 69 Page - Texas Instruments |
|
69 / 131 page ![]() XIO2001 www.ti.com SCPS212D – MAY 2009 – REVISED JANUARY 2010 Table 4-30. Link Status Register Description (continued) BIT FIELD NAME ACCESS DESCRIPTION 12 SCC R Slot clock configuration. This bit indicates that the bridge uses the same physical reference clock that the platform provides on the connector. If the bridge uses an independent clock irrespective of the presence of a reference on the connector, then this bit must be cleared. 0 = Independent 125-MHz reference clock is used 1 = Common 100-MHz reference clock is used 11 LT R Link training. This bit has no function and is read-only 0b. 10 TE R Retrain link. This bit has no function and is read-only 0b. 9:4 NLW R Negotiated link width. This field is read-only 00 0001b indicating the lane width is x1. 3:0 LS R Link speed. This field is read-only 1h indicating the link speed is 2.5 Gb/s. 4.55 Serial-Bus Data Register The serial-bus data register reads and writes data on the serial-bus interface. Write data is loaded into this register prior to writing the serial-bus slave address register (offset B2h, see Section 4.57) that initiates the bus cycle. When reading data from the serial bus, this register contains the data read after bit 5 (REQBUSY) of the serial-bus control and status register (offset B3h, see Section 4.58) is cleared. This register is reset by a PCI Express reset (PERST), a GRST, or the internally-generated power-on reset. PCI register offset: B0h Register type: Read/Write Default value: 00h BIT NUMBER 7 6 5 4 3 2 1 0 RESET STATE 0 0 0 0 0 0 0 0 4.56 Serial-Bus Word Address Register The value written to the serial-bus word address register represents the word address of the byte being read from or written to the serial-bus device. The word address is loaded into this register prior to writing the serial-bus slave address register (offset B2h, see Section 4.57) that initiates the bus cycle. This register is reset by a PCI Express reset (PERST), a GRST, or the internally-generated power-on reset. PCI register offset: B1h Register type: Read/Write Default value: 00h BIT NUMBER 7 6 5 4 3 2 1 0 RESET STATE 0 0 0 0 0 0 0 0 Copyright © 2009–2010, Texas Instruments Incorporated Classic PCI Configuration Space 69 Submit Documentation Feedback Product Folder Link(s): XIO2001 |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |