HS-3000 datasheet(13/46 Pages) BOSER

tên linh kiện	HS-3000

Giải thích chi tiết về linh kiện	386 ISA Bus SBC

PDF	46 Pages

Scroll/Zoom	100%

nhà sản xuất	BOSER [BOSER Technology Co., Ltd]

Trang chủ	http://www.boser.com.tw

Logo

13 / 46 page

Chapter 3

Hardware Installation

This chapter provides the information on how to install the hardware

using the HS-3000/4M. This chapter also contains information related

to jumper settings of switch, watchdog timer, and the DiskOnChip

address selection etc.

3.1 Before Installation

After confirming your package contents, you are now ready to install

your hardware. The following are important reminders and steps to take

before you begin with your installation process.

1. Make sure that all jumper settings match their default settings

and CMOS setup correctly. Refer to the sections on this chapter

for the default settings of each jumper.

2. Go through the connections of all external devices and make

sure that they are installed properly and configured correctly

within the CMOS setup. Refer to the sections on this chapter for

the detailed information on the connectors.

3. Keep the manual and diskette in good condition for future

reference and use.

HS-3000 bảng dữ liệu(PDF) 13 Page - BOSER Technology Co., Ltd