HS-3000 datasheet(11/46 Pages) BOSER

11 / 46 page

Chapter 2

Unpacking

This chapter explains unpacking the board, checking the equipment

and documentation and where to go from there.

2.1 Opening the Delivery Package

The HS-3000/4M is packed in an anti-static bag. The board has

components that are easily damaged by static electricity. Do not

remove the anti-static wrapping until proper precautions have been

taken. Safety Instructions in front of this manual describe anti-static

precautions and procedures.

2.2 Inspection

After unpacking the board, place it on a raised surface and carefully

inspect the board for any damage that might have occurred during

shipment. Ground the board and exercise extreme care to prevent

damage to the board from static electricity. Integrated circuits will

sometimes come out of their sockets during shipment. Examine all

integrated circuits, particularly the BIOS, processor, memory modules,

ROM-Disk, and keyboard controller chip to ensure that they are firmly

seated. The HS-3000/4M delivery package contains the following

items:

HS-3000/4M Board x 1

IDE port flat cable x 1

FDD port flat cable x 1

Printer + one COM flat cable with bracket x 1

Two COM flat cable with bracket x 1

Utility CD Disk x 1

User’s Manual x 1

HS-3000 bảng dữ liệu(PDF) 11 Page - BOSER Technology Co., Ltd