| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
H8S/2437 bảng dữ liệu(PDF) 305 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
H8S/2437 bảng dữ liệu(HTML) 305 Page - Renesas Technology Corp |
|
305 / 746 page ![]() TIMH261A_000020020300 Rev. 1.00, 09/03, page 267 of 704 Section 11 8-Bit Timer (TMR) This LSI has an on-chip 2-system 8-bit timer module (TMR0 and TMR1) with two channels operating on the basis of an 8-bit counter. In addition to external event counting, the 8-bit timer module can be used as a multifunction timer in a variety of applications, such as generation of counter reset, interrupt requests, and pulse output with an arbitrary duty cycle using a compare- match signal with two registers. This LSI also has a similar on-chip 2-system 8-bit timer module (TMRY and TMRX) with two channels. 11.1 Features • Selection of clock sources TMR0, TMR1: The counter input clock can be selected from six internal clocks and an external clock TMRY, TMRX: The counter input clock can be selected from three internal clocks and an external clock • Selection of three ways to clear the counters The counters can be cleared on compare-match A or compare-match B, or by an external reset signal. • Timer output controlled by two compare-match signals The timer output signal in each channel is controlled by two independent compare-match signals, enabling the timer to be used for various applications, such as the generation of pulse output or PWM output with an arbitrary duty cycle. • Cascading of two systems Cascading of TMR0 and TMR1: Operation as a 16-bit timer can be performed using the TMR0 as the upper half and TMR1 as the lower half (16-bit count mode). The TMR1 can be used to count TMR0 compare-match occurrences (compare-match count mode). Cascading of TMRY and TMRX: Operation as a 16-bit timer can be performed using the TMRY as the upper half and TMRX as the lower half (16-bit count mode). The TMRX can be used to count TMRY compare-match occurrences (compare-match count mode). • Multiple interrupt sources for each channel TMR0, TMR1, and TMRY: Three types of interrupts: Compare-match A, compare-match B, and overflow |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |