| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
7516 bảng dữ liệu(PDF) 37 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
7516 bảng dữ liệu(HTML) 37 Page - Renesas Technology Corp |
|
37 / 90 page ![]() Rev.1.01 Jul 01, 2003 page 37 of 89 7516 Group START/STOP condition control register Oscillation frequency f(XIN) (MHz) Fig. 39 Address data communication format Fig. 38 Structure of I2C START/STOP condition control register Note: Do not set an odd number to the START/STOP condition set bit (SSC4 to SSC0). Table 12 Recommended set value to START/STOP condition set bits (SSC4–SSC0) for each oscillation frequency Main clock divide ratio System clock φ (MHz) SCL release time ( µs) Setup time ( µs) Hold time ( µs) 8 8 4 2 2 8 2 2 XXX11010 XXX11000 XXX00100 XXX01100 XXX01010 XXX00100 3.375 µs (13.5 cycles) 3.125 µs (12.5 cycles) 2.5 µs (2.5 cycles) 3.25 µs (6.5 cycles) 2.75 µs (5.5 cycles) 2.5 µs (2.5 cycles) 6.75 µs (27 cycles) 6.25 µs (25 cycles) 5.0 µs (5 cycles) 6.5 µs (13 cycles) 5.5 µs (11 cycles) 5.0 µs (5 cycles) 3.375 µs (13.5 cycles) 3.125 µs (12.5 cycles) 2.5 µs (2.5 cycles) 3.25 µs (6.5 cycles) 2.75 µs (5.5 cycles) 2.5 µs (2.5 cycles) 4 1 2 1 b7b0 I2C START/STOP condition control register START/STOP condition set bit SCL/SDA interrupt pin polarity selection bit 0 :Falling edge active 1 :Rising edge active SCL/SDA interrupt pin selection bit 0 :SDA valid 1 :SCL valid Reserved Do not write “1” to this bit. SIS SIP SSC4SSC3SSC2SSC1SSC0 (S2D : address 003016) S Slave address R/W A Data A/A P A Data 7 bits “0” 1 to 8 bits 1 to 8 bits (1) A master-transmitter transnmits data to a slave-receiver S Slave addressR/W A Data A P A Data 7 bits “1” 1 to 8 bits1 to 8 bits (2) A master-receiver receives data from a slave-transmitter 7 bits “0” 8 bits (3) A master-transmitter transmits data to a slave-receiver with a 10-bit address 1 to 8 bits1 to 8 bits S R/W A Slave address 1st 7 bits Slave address 2nd bytes A AData Data P A/A 7 bits “0” 8 bits (4) A master-receiver receives data from a slave-transmitter with a 10-bit address S : START condition A : ACK bit Sr : Restart condition P : STOP condition R/W : Read/Write bit 7 bits “1” 1 to 8 bits1 to 8 bits S R/W A Slave address 1st 7 bits Slave address 2nd bytes A Sr Slave address 1st 7 bits R/W A Data Data P A : Master to slave : Slave to master A |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |