B2425 datasheet(5/36 Pages) HAKKO

tên linh kiện	B2425

Giải thích chi tiết về linh kiện	Desoldering Tool

PDF	36 Pages

Scroll/Zoom	100%

nhà sản xuất	HAKKO [HAKKO Corporation]

Trang chủ	https://www.hakko.com/

Logo

5 / 36 page

3. Set the HAKKO FR-4001 in the handpiece holder.

4. Connect the hose from the HAKKO FR-4001

to the vacuum outlet cap on the HAKKO

FR-400 station.

5. Plug the power cord into a grounded power outlet.

Ensure that the power switch is OFF before inserting

the AC plug.

CAUTION

Be sure to ground this product as it is ESD

safe by design.

6. Turn the power switch ON.

Turn the power

switch ON

Connect the hose.

C. Station

CAUTION

Be sure to hold the plug when inserting or removing the handpiece cord.

●

Connection

1. Connect the power cord to the receptacle on the

rear of the station.

2. Connect the plug from the HAKKO FR-4001

to the receptacle on the HAKKO FR-400.

CAUTION

Connect the plug to the receptacle, aligning

the tab on the plug with the opening on the

receptacle.

Insert the plug into

the receptacle until

it seats.

To disconnect, pull the plug

from the receptacle while

pressing down the tab on

the plug.

B2425 bảng dữ liệu(PDF) 5 Page - HAKKO Corporation