NXP Semiconductors

KTFRDMHB2000ESEVMUG

FRDM-HB2000ESEVM evaluation board

KTFRDMHB2000ESEVMUG

All information provided in this document is subject to legal disclaimers.

© NXP B.V. 2018. All rights reserved.

User guide

Rev. 2 — 11 June 2018

24 / 34

6.2.1 SPI control

Figure 15. SPI control description

Table 10. SPI control description

Name

Description

Read

To read the content of each register, click the read button on top of each register.

Write

Click individual bits of any register and then press the corresponding write button to write into the register.

SPI control

This section is designed for ease of use. Each dropdown menu sets or resets appropriate bits in the

registers for a selected configuration. However, after configuration selection, press the write button of the

corresponding register to be able to configure the part.