S124 datasheet(20/107 Pages) RENESAS

tên linh kiện	S124

Giải thích chi tiết về linh kiện	S124 Microcontroller Group

PDF	107 Pages

Scroll/Zoom	100%

nhà sản xuất	RENESAS [Renesas Technology Corp]

Trang chủ	http://www.renesas.com

Logo

20 / 107 page

R01DS0264EU0140 Rev.1.40

Page 20 of 107

Sep 3, 2024

S124 Datasheet

2. Electrical Characteristics

Electrical Characteristics

Unless otherwise specified, the electrical characteristics of the MCU are defined under the following conditions:

VCC*1 = AVCC0 = VCC_USB*2 = VCC_USB_LDO*2 = 1.6 to 5.5V, VREFH0 = 1.6 to AVCC0,

VSS = AVSS0 = VREFL0 = VSS_USB = 0 V, Ta = Topr

Note 1. The typical condition is set to VCC = 3.3V.

Note 2. When USBFS is not used.

Figure 2.1 shows the timing conditions.

Figure 2.1

Input or output timing measurement conditions

The measurement conditions of timing specification in each peripherals are recommended for the best peripheral

operation. However, make sure to adjust driving abilities of each pins to meet your conditions.

Each function pin used for the same function must select the same drive ability. If I/O drive ability of each function is

mixed, the AC specification of the function is not guaranteed.

For example P100

VOH = VCC × 0.7, VOL = VCC × 0.3

VIH = VCC × 0.7, VIL = VCC × 0.3

Load capacitance C = 30pF

S124 bảng dữ liệu(PDF) 20 Page - Renesas Technology Corp