F24 datasheet(96/210 Pages) RENESAS

96 / 210 page

RL78/F23, F24

4. ELECTRICAL SPECIFICATIONS (GRADE 4)

R01DS0446EJ0120 Rev.1.20

Page 96 of 207

Dec 31, 2025

(3/3)

Parameter

Symbol

Conditions

Ratings

Unit

Positive injected

current (VI > VDD) Note

IINJP

Per pin

P00 to P03, P10 to P17, P30 to P32, P41 to P47, P50

to P57, P60 to P67, P75 to P77, P106, P107, P126,

P127, P140, P150 to P157

P70 to P74, P80 to P87, P90 to P97, P100 to P105,

P120, P125

Negative injected

current

(VI < VSS) Note

IINJN

Per pin

P00 to P03, P10 to P17, P30 to P32, P41 to P47, P50

to P57, P60 to P67, P75 to P77, P106, P107, P126,

P127, P140, P150 to P157

-5

P70 to P74, P80 to P87, P90 to P97, P100 to P105,

P120, P125

-0.5

Sum of all positive

injected currents Note

ΣIINJP

Total of all pins

P00 to P03, P10 to P17, P30 to P32, P41 to P47, P50

to P57, P60 to P67, P75 to P77, P106, P107, P126,

P127, P140, P150 to P157

P70 to P74, P80 to P87, P90 to P97, P100 to P105,

P120, P125

Sum of all negative

injected currents Note

ΣIINJN

Total of all pins

P00 to P03, P10 to P17, P30 to P32, P41 to P47, P50

to P57, P60 to P67, P75 to P77, P106, P107, P126,

P127, P140, P150 to P157

-40

P70 to P74, P80 to P87, P90 to P97, P100 to P105,

P120, P125

-2

Total of all injected

currents Note

Σ|IINJP|

+ Σ|IINJN|

Total of all pins

P00 to P03, P10 to P17, P30 to P32, P41 to P47, P50

to P57, P60 to P67, P75 to P77, P106, P107, P126,

P127, P140, P150 to P157

P70 to P74, P80 to P87, P90 to P97, P100 to P105,

P120, P125

Operating ambient

temperature

In normal operation mode

-40 to +125

°C

In flash memory programming mode

Storage temperature

Tstg

-65 to +150

°C

Note Conditions: 2.7 V ≤ EVDD0 = EVDD1 = VDD ≤ 5.5 V, VSS = EVSS0 = EVSS1 = 0 V

Caution Product quality may suffer if the absolute maximum rating is exceeded even momentarily for any

parameter. That is, the absolute maximum ratings are rated values at which the product is on the verge

of suffering physical damage, and therefore the product must be used under conditions that ensure

that the absolute maximum ratings are not exceeded.

Remarks 1. Unless specified otherwise, the characteristics of alternate-function pins are the same as those of the port

pins.

2. VI :This is the input voltage level to the port pins.

F24 bảng dữ liệu(PDF) 96 Page - Renesas Technology Corp

F24 bảng dữ liệu(HTML) 96 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

bảng dữ liệu tải về

Link URL