| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
EM78F651NAMS/NAMJ bảng dữ liệu(PDF) 27 Page - ELAN Microelectronics Corp |
|
|
|||||||||||||||||||||||||||||
EM78F651NAMS/NAMJ bảng dữ liệu(HTML) 27 Page - ELAN Microelectronics Corp |
|
27 / 58 page ![]() EM78F651N 8-Bit Microcontroller Product Specification (V1.1) 10.20.2006 • 23 (This specification is subject to change without further notice) [b] If WDT is enabled before SLEP, Port 6 Input Status Change wake-up and External interrupt (/INT) must be disabled. Hence, the EM78F651N, can be awakened only by Case 1 or 2. Refer to the section on Interrupt. If Port 6 Input Status Change Interrupt is used to wake-up the EM78F651N, (Case [a] above), the following instructions must be executed before SLEP: MOV A, @xx000110b ; Select internal TCC clock CONTW CLR R1 ; Clear TCC and prescaler WDTC ; Clear WDT and prescaler MOV A, @0xxx1110b ; Select WDT prescaler & disable WDT IOW RA MOV R6, R6 ; Read Port 6 MOV A, @00000x1xb ; Enable Port 6 input change interrupt IOW RF ENI (or DISI) ; Enable (or disable) global interrupt SLEP ; Sleep NOP One problem user should be aware of, is that after waking up from sleep mode, WDT would be enabled automatically. The WDT operation (being enabled or disabled) should be handled appropriately by software after waking up from sleep mode. |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |