M7020R datasheet(13/150 Pages) STMICROELECTRONICS

13 / 150 page

13/150

M7020R

DC AND AC PARAMETERS

This section summarizes the operating and mea-

surement conditions, as well as the DC and AC

characteristics of the device. The parameters in

the following DC and AC Characteristic tables are

derived from tests performed under the Measure-

ment Conditions listed in the relevant tables. De-

signers should check that the operating conditions

in their projects match the measurement condi-

tions when using the quoted parameters.

Table 4. DC and AC Measurement Conditions

Note: 1. Maximum allowable applies to overshoot only (VDDQ is 3.3V supply).

2. Minimum allowable applies to undershoot only.

Sym

Parameter

Min

Max

Units

VDD

VDD Operating Supply Voltage

1.7

1.9

VDDQ VDDQ Voltage for I/O (3.3V)

3.135

3.465

VDDQ VDDQ Voltage for I/O (2.5V)

2.4

2.6

Ambient Operating Temperature

°C

Supply Voltage Tolerance

–5

Input Pulse Levels (VDDQ = 3.3V)

GND to 3.0

Input Pulse Levels (VDDQ = 2.5V)

GND to 2.5

Input Rise and Fall Times at 0.3V and 2.7V (VDDQ = 3.3V)

≤ 2ns (see Figure 6, page 14)

Input Rise and Fall Times at 0.25V and 2.25V (VDDQ = 2.5V)

≤ 2ns (see Figure 6, page 14)

Input Timing Reference Levels (VDDQ = 3.3V)

1.5

Input Timing Reference Levels (VDDQ = 2.5V)

1.25

Output Timing Reference Levels (VDDQ = 3.3V)

1.5

Output Timing Reference Levels (VDDQ = 2.5V)

1.25

Output Load

(see Figure 5 and Figure 7, page 14)

M7020R bảng dữ liệu(PDF) 13 Page - STMicroelectronics

M7020R bảng dữ liệu(HTML) 13 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

bảng dữ liệu tải về

Link URL