5.1 Absolute Maximum Ratings

See(1)

MIN

MAX

UNIT

VCC1, VCC2

Supply Voltage (2)

-0.5

6

V

V

Voltage at INx, OUTx

-0.5

VCCX + 0.5 (3)

V

IO

Output current

-15

15

mA

TJ

Junction temperature

150

°C

Tstg

Storage temperature

-65

150

°C

(1)

Operation outside the Absolute Maximum Ratings may cause permanent device damage. Absolute Maximum Ratings do not imply

functional operation of the device at these or any other conditions beyond those listed under Recommended Operating Conditions.

If used outside the Recommended Operating Conditions but within the Absolute Maximum Ratings, the device may not be fully

functional, and this may affect device reliability, functionality, performance, and shorten the device lifetime.

(2)

All voltage values except differential I/O bus voltages are with respect to the local ground terminal (GND1 or GND2) and are peak

voltage values

(3)

Maximum voltage must not exceed 6 V.

5.2 ESD Ratings

VALUE

UNIT

VESD

Electrostatic discharge

Human body model (HBM), per ANSI/

ESDA/JEDEC JS-001, all pins (1)

±6000

V

Charged device model (CDM), per

JEDEC specification JESD22-C101, all

pins(2)

±1500

Contact discharge per IEC 61000-4-2;

Isolation barrier withstand test(3) (4)

±8000

(1)

JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.

(2)

JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process.

(3)

IEC ESD strike is applied across the barrier with all pins on each side tied together creating a two-terminal device.

(4)

Testing is carried out in air or oil to determine the intrinsic contact discharge capability of the device.

www.ti.com

ISO7710

SLLSER9E – NOVEMBER 2016 – REVISED DECEMBER 2024

Copyright © 2024 Texas Instruments Incorporated

Submit Document Feedback

5

Product Folder Links: ISO7710