| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
STPM098C bảng dữ liệu(PDF) 67 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STPM098C bảng dữ liệu(HTML) 67 Page - STMicroelectronics |
|
67 / 110 page ![]() Table 53. IOUT overbalancing monitor electrical characteristics Symbol Parameter Test condition Min Typ Max Unit Notes IOUT_MON_UMB_th_lsb IOUT UMB monitoring threshold step - 0.94 - A Application information IOUT_MON_UMB_th_range IOUT UMB monitoring threshold range 0.94 - 29.14 A Application information T_iout_umb_detect_dly IOUT UMB monitoring detection delay CLK_SSM_EN = 0 - 65 100 μs Application information Current sum overcurrent diagnosis A dedicated OC monitoring on the phase current sum of each loop is performed. This diagnosis is based upon the sum of converted current information of all phases referred to the specific loop. If Σj=1mISENj−CFILTVREF1 ≥IOUTn_oc_sum_thoccursIOUTm_sum_retrytimes,theIOUTn_OC_SUMflagisset.[n = 1, 2]. The reference thresholds for the IOUTn overcurrent monitor unit IOUTn_oc_sum_th can be separately configured for loop 1 and 2 through a dedicated PMBus™ register as follows: IOUTnOCSUMTH=IOUTMONOCSUMtℎlsb×IOUTnOCSUMTH7:0 (25) Where: IOUT_MON_OC_SUM_th_lsb is the minimum voltage step [0.94 A]. IOUTn _OC_FAULT_LIMIT[7:0] are the dedicated PMBus™ configuration bits. [0 ~ 239.7A]. Default value is IOUTn_OC_SUM_TH = 0xBF (180 A) for loop 1 and 0x35 (50 A) for loop 2. In case IOUTn_OC_SUM_TH = 0x00 the related overcurrent monitor function is disabled and no detection is performed. The reference retry times for the IOUTn_SUM overcurrent monitor unit IOUTn_oc_sum_retry can be separately configured for loop 1 and 2 through a dedicated PMBus™ register as follows: IOUTmOCSUMRETRY=IOUTMONOCSUMretrylsb×IOUTmOCSUMRETRY7:0 (26) Where: IOUT_MON_OC_SUM_retry_lsb is the minimum step. IOUTm_OC_SUM_RETRY [7:0] are the dedicated PMBus™ configuration bits. The default value is IOUTm_OC_SUM_RETRY = 0x05. The absolute value of the maximum input voltage slew rate detectable by IOUT monitor is given by IOUT_adc_lsb/IOUT_adc_latency. STPM098C Functional description DS14440 - Rev 1 page 67/110 |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |