| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
L99PM72PXP bảng dữ liệu(PDF) 55 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
L99PM72PXP bảng dữ liệu(HTML) 55 Page - STMicroelectronics |
|
55 / 128 page ![]() L99PM72PXP Electrical specifications Doc ID 023553 Rev 3 55/128 5.5 Electrical characteristics 5.5.1 Supply and supply monitoring The voltages are referred to ground and currents are assumed positive, when the current flows into the pin. Tj = -40°C to 130°C, unless otherwise specified. Table 14. Supply and supply monitoring Symbol Parameter Test condition Min. Typ. Max. Unit VSUV VS undervoltage threshold VS increasing / decreasing 5.11 5.81 V Vhyst_UV VS undervoltage hysteresis 0.04 0.1 0.15 V VSOV VS overvoltage threshold VS increasing / decreasing 18.5 22 V Vhyst_OV VS overvoltage hysteresis hysteresis 0.5 1 1.5 V tovuv_filt VS overvoltage /undervoltage filter time 64*Tosc IV(act) Current consumption in active mode VS =12V; TxDC =high; TxDL = high; V1 =ON; V2 = ON; HS/LS Driver OFF 612 mA IV(BAT) Current consumption in VBat_standby mode (1) 1. Conditions for specified current consumption: VLIN >(VS -1.5 V) (CAN_H – CAN_L) < 0.4 V or (CAN_H – CAN_L) > 1.2 V VWU <1V or VWU > (Vs – 1.5V) The current consumption in standby modes with cyclic sense can be calculated using the following formulas: IV(BAT)CS =IV(BAT) +55µA+(2 mA *(tON + 100 µs) / T) I(V1)CS =IV1 + 55 µA + (2 mA * (tON + 100 µs) / T) VS = 12V; both voltage regulators deactivated; HS/LS driver OFF; no CAN communication 812 28 µA IV(BAT)CS Current consumption in VBat_standby mode with cyclic sense enabled(1) VS = 12 V; both voltage regulators deactivated; T= 50 ms; tON = 100 µs 40 75 125 µA IV(BAT)CW Current consumption in VBat_standby mode with cyclic wake enabled(1) VS = 12 V; both voltage regulators deactivated during standby phase 40 75 125 µA IV(V1stby) Current consumption in V1_standby mode (1) VS = 12 V; voltage regulator V1 active (IV1 <ICMP); HS/LS driver OFF 16 51 76 µA IV(SW) Current consumption in standby mode but selective wakeup enabled and CAN communication on the bus (PN_TRX_selective_Sleep) (1) VS = 12 V; both voltage regulators deactivated; HS/LS driver OFF 1200 µA |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |