STM32G030F6 datasheet(63/94 Pages) STMICROELECTRONICS

63 / 94 page

DS12991 Rev 1

63/94

STM32G030x6/x8

Electrical characteristics

Input/output AC characteristics

The definition and values of input/output AC characteristics are given in Figure 18 and

Table 51, respectively.

Unless otherwise specified, the parameters given are derived from tests performed under

the ambient temperature and supply voltage conditions summarized in Table 21: General

operating conditions.

Table 50. Output voltage characteristics(1)

Symbol

Parameter

Conditions

Min

Max

Unit

VOL

Output low level voltage for an I/O pin

CMOS port(2)

|IIO| 6 mA

VDDIO1 ≥ 2.7 V

-0.4

VOH

Output high level voltage for an I/O pin

VDDIO1 - 0.4

VOL(3) Output low level voltage for an I/O pin

TTL port(2)

|IIO| = 6 mA

VDDIO1 ≥ 2.7 V

-0.4

VOH(3) Output high level voltage for an I/O pin

2.4

VOL(3) Output low level voltage for an I/O pin

All I/Os

|IIO| = 15 mA

VDDIO1 ≥ 2.7 V

-1.3

VOH(3) Output high level voltage for an I/O pin

VDDIO1 - 1.3

VOL(3) Output low level voltage for an I/O pin

|IIO| = 3 mA

-0.4

VOH(3) Output high level voltage for an I/O pin

VDDIO1 - 0.45

VOLFM+

(3)

Output low level voltage for an FT I/O

pin in FM+ mode (FT I/O with _f option)

|IIO| = 20 mA

VDDIO1 ≥ 2.7 V

-0.4

|IIO| = 9 mA

0.4

1. The IIO current sourced or sunk by the device must always respect the absolute maximum rating specified in Table 18:

Voltage characteristics, and the sum of the currents sourced or sunk by all the I/Os (I/O ports and control pins) must always

respect the absolute maximum ratings ΣIIO.

2. TTL and CMOS outputs are compatible with JEDEC standards JESD36 and JESD52.

3. Guaranteed by design.

Table 51. I/O AC characteristics(1)(2)

Speed Symbol

Parameter

Conditions

Min

Max

Unit

Fmax

Maximum frequency

C=50 pF, 2.7 V ≤ VDDIO1 ≤ 3.6 V

MHz

C=50 pF, 2.0 V ≤ VDDIO1 ≤ 2.7 V

0.35

C=10 pF, 2.7 V ≤ VDDIO1 ≤ 3.6 V

C=10 pF, 2.0 V ≤ VDDIO1 ≤ 2.7 V

0.45

Tr/Tf

Output rise and fall time

C=50 pF, 2.7 V ≤ VDDIO1 ≤ 3.6 V

100

C=50 pF, 2.0 V ≤ VDDIO1 ≤ 2.7 V

225

C=10 pF, 2.7 V ≤ VDDIO1 ≤ 3.6 V

C=10 pF, 2.0 V ≤ VDDIO1 ≤ 2.7 V

150

STM32G030F6 bảng dữ liệu(PDF) 63 Page - STMicroelectronics

STM32G030F6 bảng dữ liệu(HTML) 63 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94

bảng dữ liệu tải về

Link URL