TMS320DM355 datasheet(3/154 Pages) TI

3 / 154 page

www.ti.com

1.2 Description

TMS320DM355

Digital Media System-on-Chip (DMSoC)

SPRS463D – SEPTEMBER 2007 – REVISED FEBRUARY 2008

The DM355 is a highly integrated, programmable platform for digital still camera, digital photo frames, IP

security cameras, 4-channel digital video recorders, video door bell application, and other low cost

portable digital video applications. Designed to offer portable video designers and manufacturers the

ability to produce affordable portable digital video solutions with high picture quality, the DM355 combines

high performance MPEG4 HD (720p) codecs and JPEG codecs up to 50M pixels per second, high quality,

and low power consumption at a very low price point. The DM355 also enables seamless interface to most

additional external devices required for a complete digital camera implementation. The interface is flexible

enough to support various types of CCD and CMOS sensors, signal conditioning circuits, power

management, DDR/mDDR memory, SRAM, NAND, shutter, Iris and auto-focus motor controls, etc.

The DM355 processor core is an ARM926EJ-S RISC processor. The ARM926EJ-S is a 32-bit processor

core that performs 32-bit and 16-bit instructions and processes 32-bit, 16-bit, and 8-bit data. The core

uses pipelining so that all parts of the processor and memory system can operate continuously. The ARM

core incorporates:

• A coprocessor 15 (CP15) and protection module

• Data and program Memory Management Units (MMUs) with table look-aside buffers.

• Separate 16K-byte instruction and 8K-byte data caches. Both are four-way associative with virtual

index virtual tag (VIVT).

DM355 performance is enhanced by its MPEG4/JPEG coprocessor. The MPEG4/JPEG coprocessor

performs the computational operations required for image processing; JPEG compression and MPEG4

video and imaging standard. The MPEG4/JPEG coprocessor supports MPEG4 SP at HD (720p), D1,

VGA, SIF encode/decode resolutions and JPEG encode/decode up to 50M pixels per second.

The DM355 device has a Video Processing Subsystem (VPSS) with two configurable video/imaging

peripherals:

• A Video Processing Front-End (VPFE)

• A Video Processing Back-End (VPBE)

The VPFE port provides an interface for CCD/CMOS imager modules and video decoders. The VPBE

provides hardware On Screen Display (OSD) support and composite NTSC/PAL and digital LCD output.

The DM355 peripheral set includes:

• An inter-integrated circuit (I2C) Bus interface

• Two audio serial ports (ASP)

• Three 64-bit general-purpose timers each configurable as two independent 32-bit timers

• A 64-bit watchdog timer

• Up to 104-pins of general-purpose input/output (GPIO) with programmable interrupt/event generation

modes, multiplexed with other peripherals

• Three UARTs with hardware handshaking support on one UART

• Three serial port Interfaces (SPI)

• Four pulse width modulator (PWM) peripherals

• Four real time out (RTO) outputs

• Two Multi-Media Card / Secure Digital (MMC/SD) interfaces

• A USB 2.0 full and high-speed device and host interface

• Two external memory interfaces:

–

An asynchronous external memory interface (AEMIF) for slower memories/peripherals such as

NAND and OneNAND,

–

A high speed synchronous memory interface for DDR2/mDDR.

Submit Documentation Feedback

TMS320DM355 Digital Media System-on-Chip (DMSoC)

TMS320DM355 bảng dữ liệu(PDF) 3 Page - Texas Instruments

TMS320DM355 bảng dữ liệu(HTML) 3 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

bảng dữ liệu tải về

Link URL