TAS3103ADBT datasheet(57/154 Pages) TI2

57 / 154 page

2−24

Overhead/Guard Bits

16-Bit

Audio

18-Bit

Audio

20-Bit

Audio

24-Bit

Audio

Precision/Noise Bits

32-Bit

Audio

Figure 2−19. DAP Arithmetic Unit Data Word Structure

The arithmetic engine is a 48-bit (25.23-format) processor consisting of a general-purpose 76-bit arithmetic logic unit

(ALU) and function-specific arithmetic blocks. Multiply operations (excluding the function-specific arithmetic blocks)

always involve 48-bit DAP words and 28-bit coefficients (usually I2C programmable coefficients). If a group of

products is to be added together, the 76-bit product of each multiplication is applied to a 76-bit adder, where a DSP-like

multiply-accumulate (MAC) operation takes place. Biquad filter computations use the MAC operation to maintain

precision in the intermediate computational stages.

To maximize the linear range of the 76-bit ALU, saturation logic is not used. Intermediate overflows are then permitted

in multiply-accumulate operations, but it is assumed that subsequent terms in the multiply-accumulate computation

flow corrects the overflow condition. The biquad filter structure used in the TAS3103A is the direct form-I structure

and has only one accumulation node. With this type of structure, intermediate overflow is allowed as long as the

designer of the filters has ensured that the final output is bounded and does not overflow. Figure 2−20 shows a

bounded computation that experiences an intermediate overflow condition. For ease of illustration, 8-bit arithmetic

is used.

The DAP memory banks include a dual-port data RAM for storing intermediate results, a coefficient RAM, a 4K

× 16

RAM for implementing the delay stages, and a fixed program ROM. Only the coefficient RAM, accessible via the I2C

bus, is available to the user.

TAS3103ADBT bảng dữ liệu(PDF) 57 Page - Texas Instruments