C8051F360 datasheet(25/288 Pages) SILABS

25 / 288 page

Rev. 1.0

C8051F360/1/2/3/4/5/6/7/8/9

nels are required. All the digital and analog peripherals are functional and work correctly while debugging.

All the peripherals (except for the ADC and SMBus) are stalled when the MCU is halted, during single

stepping, or at a breakpoint in order to keep them synchronized.

The C8051F360DK development kit provides all the hardware and software necessary to develop applica-

tion code and perform in-circuit debugging with the C8051F36x MCUs. The kit includes software with a

developer's studio and debugger, an integrated 8051 assembler, and a debug adapter. It also has a target

application board with the associated MCU installed and prototyping area, plus the required cables, and

wall-mount power supply. The Development Kit requires a PC running Windows98SE or later.

The Silicon Labs IDE interface is a vastly superior developing and debugging configuration, compared to

standard MCU emulators that use on-board "ICE Chips" and require the MCU in the application board to

be socketed. Silicon Labs' debug paradigm increases ease of use and preserves the performance of the

precision analog peripherals.

TARGET PCB

Debug

Adapter

VDD

GND

C2 (x2), VDD, GND

WINDOWS 2000 or later

Silicon Labs Integrated

Development Environment

C8051F360

Figure 1.7. Development/In-System Debug Diagram

1.4.

Programmable Digital I/O and Crossbar

C8051F36x devices include up to 39 I/O pins (four byte-wide Ports and one 7-bit-wide Port). The

C8051F36x Ports behave like typical 8051 Ports with a few enhancements. Each Port pin may be config-

ured as an analog input or a digital I/O pin. Pins selected as digital I/Os may additionally be configured for

push-pull or open-drain output. The “weak pullups” that are fixed on typical 8051 devices may be globally

disabled, providing power savings capabilities.

C8051F360 bảng dữ liệu(PDF) 25 Page - Silicon Laboratories