CS44800 datasheet(77/80 Pages) CIRRUS

77 / 80 page

DS632F1

CS44800

Signal to Noise Ratio (SNR)

SNR, similar to DR, is the ratio of an arbitrary sinusoidal input signal to the RMS sum of the noise floor, in

the presence of a signal. It is measured over a 20 Hz to 20 kHz bandwidth with units in dB.

SRC

Sample Rate Converter. Converts data derived at one sample rate to a differing sample rate. The CS44800

operates at a fixed sample frequency. The internal sample rate converter is used to convert digital audio

streams playing back at other frequencies to the PWM output rate.

Total Harmonic Distortion + Noise (THD+N)

The ratio of the rms value of the signal to the rms sum of all other spectral components over the specified

band width (typically 10 Hz to 20 kHz), including distortion components. Expressed in decibels. Measured

at -1 and -20 dBFS as suggested in AES17-1991 Annex A.

9. REFERENCES

Cirrus Logic, “Audio Quality Measurement Specification,” Version 1.0, 1997.

http://www.cirrus.com/products/papers/meas/meas.html

Cirrus Logic, “AN18: Layout and Design Rules for Data Converters and Other Mixed Signal Devices,”

Version 6.0, February 1998.

Cirrus Logic, “AN22: Overview of Digital Audio Interface Data Structures, Version 2.0”, February 1998.; A

useful tutorial on digital audio specifications.

Philips Semiconductor, “The I²C-Bus Specification: Version 2,” Dec. 1998.

http://www.semiconductors.philips.com

CS44800 bảng dữ liệu(PDF) 77 Page - Cirrus Logic