| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
XRT86VL34 bảng dữ liệu(PDF) 78 Page - Exar Corporation |
|
|
|||||||||||||||||||||||||||||
XRT86VL34 bảng dữ liệu(HTML) 78 Page - Exar Corporation |
|
78 / 156 page ![]() XRT86VL34 73 QUAD T1/E1/J1 FRAMER/LIU COMBO - T1 REGISTER DESCRIPTION REV. V1.2.0 3-0 RxCOND[3:0] R/W 0000 Receive Channel Conditioning for Timeslot 0 to 23 These bits allow the user to substitute the input line data (Octets 0-23) with internally generated Conditioning Codes prior to transmission to the back- plane interface on a per-channel basis. The table below presents the differ- ent conditioning codes based on the setting of these bits. NOTE: Register address 0xn300 represents time slot 0, and address 0xn317 represents time slot 23. TABLE 53: RECEIVE CHANNEL CONTROL REGISTER 0-23 (RCCR 0-23) HEX ADDRESS: 0Xn360 TO 0XN377 BIT FUNCTION TYPE DEFAULT DESCRIPTION-OPERATION RXCOND[1:0] CONDITIONING CODES 0x0 / 0xE Contents of timeslot octet are unchanged. 0x1 All 8 bits of the selected timeslot octet are inverted (1’s complement) OUTPUT = (TIME_SLOT_OCTET) XOR 0xFF 0x2 Even bits of the selected timeslot octet are inverted OUTPUT = (TIME_SLOT_OCTET) XOR 0xAA 0x3 Odd bits of the selected time slot octet are inverted OUTPUT = (TIME_SLOT_OCTET) XOR 0x55 0x4 Contents of the selected timeslot octet will be substituted with the 8 -bit value in the Receive Programmable User Code Register (0xn380-0xn397), 0x5 Contents of the timeslot octet will be substituted with the value 0x7F (BUSY Code) 0x6 Contents of the timeslot octet will be substituted with the value 0xFF (VACANT Code) 0x7 Contents of the timeslot octet will be substituted with the BUSY time slot code (111#_####), where ##### is the Timeslot number 0x8 Contents of the timeslot octet will be substituted with the MOOF code (0x1A) 0x9 Contents of the timeslot octet will be substituted with the A-Law Digital Milliwatt pattern 0xA Contents of the timeslot octet will be substituted with the μ-Law Digital Milliwatt pattern 0xB The MSB (bit 1) of input data is inverted 0xC All input data except MSB is inverted 0xD Contents of the timeslot octet will be substituted with the PRBS X15 + X 14 + 1/QRTS pattern NOTE: PRBS X15 + X 14 + 1 or QRTS pattern depends on PRBSType selected in the register 0xn123 - bit 7 0xF D/E time slot - The RxDE[2:0] bits in the Transmit Signal- ing and Data Link Select Register (0xn10C) will determine the data source for Receive D/E time slots. |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |