| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
VT8235 bảng dữ liệu(PDF) 69 Page - VIA Technologies, Inc. |
|
|
|||||||||||||||||||||||||||||
VT8235 bảng dữ liệu(HTML) 69 Page - VIA Technologies, Inc. |
|
69 / 145 page ![]() VT8235 V-Link South Bridge Revision 1.22 October 24, 2002 -63- Device 17 Function 0 Bus Control Registers UrpuytvrÃDp XrÃ8rp Offset 48 – Read Pass Write Control ...............................RW 7 APIC FSB Fixed at Low DW 0 Disable (Address Bit-2 not masked)...... default 1 Enable (force A2 from APIC FSB to low) Address bit A2 controls whether data is in the lower (0) or upper (1) doubleword of a quadword sent to the CPU. When this bit is enabled, A2 is masked which means it is always 0 to select the lower doubleword. 6-4 Reserved ........................................ always reads 0 3 AC97 / LPC Read Pass Write 0 Disable (a read cannot be performed before a preceeding write has been completed) .. default 1 Enable (internal AC97 and LPC devices are allowed to perform a read before a preceeding write) 2 IDE Read Pass Write 0 Disable (a read cannot be performed before a preceeding write has been completed) .. default 1 Enable (the internal IDE controller is allowed to perform a read before a preceeding write) 1 USB Read Pass Write 0 Disable (a read cannot be performed before a preceeding write has been completed) .. default 1 Enable (the internal USB controllers are allowed to perform a read before a preceeding write) 0 NIC Read Pass Write 0 Disable (a read cannot be performed before a preceeding write has been completed) .. default 1 Enable (the internal LAN controller is allowed to perform a read before a preceeding write) Offset 49 – CCA Control .................................................. RW 7 Reserved ........................................always reads 0 6 South Bridge Internal Master Devices Priority Higher Than External PCI Master 0 Disable ................................................... default 1 Enable The “CCA” is an internal arbiter that controls the priority of external PCI masters vs. internal master devices. Normally priority is the same for internal and external PCI master devices, but when this bit is enabled, internal master devices are given higher priority than external PCI masters (3/4 : 1/4). 5 CCA Clean to Mask Off IRQ Controls whether interrupt requests are gated until data is written to memory. 0 Disable ................................................... default 1 Enable 4-3 Reserved (Do Not Program) ....................default = 0 2 WSC Mask Off INTR Controls whether INTR is masked until write snoop is complete. 0 Disable ................................................... default 1 Enable 1-0 Reserved (Do Not Program) ....................default = 0 |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |