MSP430F14X datasheet(59/83 Pages) TI

59 / 83 page

MSP430F149, MSP430F148, MSP430F147

MSP430F1491, MSP430F1481, MSP430F1471

MSP430F135, MSP430F133

www.ti.com

SLAS272H – JULY 2000 – REVISED MAY 2018

Submit Documentation Feedback

Product Folder Links: MSP430F149 MSP430F148 MSP430F147 MSP430F1491 MSP430F1481 MSP430F1471

MSP430F135 MSP430F133

Device and Documentation Support

7.1

Getting Started and Next Steps

For more information on the MSP430 family of devices and the tools and libraries that are available to

help with your development, visit the Getting Started page.

7.2

Device Nomenclature

To designate the stages in the product development cycle, TI assigns prefixes to the part numbers of all

MSP MCU devices. Each MSP MCU commercial family member has one of two prefixes: MSP or XMS.

These prefixes represent evolutionary stages of product development from engineering prototypes (XMS)

through fully qualified production devices (MSP).

XMS – Experimental device that is not necessarily representative of the final device's electrical

specifications

MSP – Fully qualified production device

XMS devices are shipped against the following disclaimer:

"Developmental product is intended for internal evaluation purposes."

MSP devices have been characterized fully, and the quality and reliability of the device have been

demonstrated fully. TI's standard warranty applies.

Predictions show that prototype devices (XMS) have a greater failure rate than the standard production

devices. TI recommends that these devices not be used in any production system because their expected

end-use failure rate still is undefined. Only qualified production devices are to be used.

TI device nomenclature also includes a suffix with the device family name. This suffix indicates the

temperature range, package type, and distribution format. Figure 7-1 provides a legend for reading the

complete device name.

MSP430F14X bảng dữ liệu(PDF) 59 Page - Texas Instruments