| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
AT83SND2CMP3B bảng dữ liệu(PDF) 99 Page - ATMEL Corporation |
|
|
|||||||||||||||||||||||||||||
AT83SND2CMP3B bảng dữ liệu(HTML) 99 Page - ATMEL Corporation |
|
99 / 241 page ![]() 99 4341F–MP3–03/06 AT8xC51SND2C/MP3B Table 15-27. PA Operating Mode Table 15-28. PA Low Power Mode 15.3 Audio Supplies and Start-up In operating mode AUDVBAT (supply of the audio power amplifier) must be between 3.2V and 5,5V. AUDVDD, HSVDD and VDD must be inferior or equal to AUDVBAT. A typical application is AUDVBAT connected to a battery and AUDVDD, HSVDD and VDD sup- plied by regulators. AUDVBAT must be present at the same time or before AUDVDD, HSVDD and VDD. AUDRST must be active low (0) until the voltages are not etablished and reach the proper values. To avoid noise issues, it is recommended to use ceramic decoupling capacitors for each supply closed to the package. The track of the supplies must be optimized to minimize the resistance especially on AUDVBAT where all the current from the power amplifier comes from. Note: Refer to the application diagram. 0110 5 0111 2 1000 -1 1001 -4 1010 -7 1011 -10 1100 -13 1101 -16 1110 -19 1111 -22 APAON APAPRECH Operating Mode 0 0 Stand-By 0 1 Input Capacitors Precharge 1 0 Active Mode 1 1 Forbidden State APALP Power Mode 0 Low power mode 1 High power mode |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |