GV2AP02 datasheet(12/48 Pages) SCHNEIDER

12 / 48 page

Presentation (continued)

Variable speed drives

Altivar Machine ATV320

References:

page 12

Description

1 Power terminals

2 Protective cover to block access to the power terminals 1 when closed

3 RJ45 communication port for access to integrated protocols: Modbus serial link

and CANopen machine bus

4 Protective cover for access to the control terminals (also includes a label with a

wiring diagram)

5 Control terminals for I/O connection:

6 digital inputs:

4 configurable for positive digital input (Sink) or negative digital input (Source)

1 input configurable as a PTC probe input

1 x 20 kHz pulse control input, 24 V c, impedance 3.5 kW, sampling time 8 ms

1 digital output:

24 V c, sampling time 2 ms, maximum voltage 30 V, maximum current 100 mA

3 analog inputs:

1 current analog input, by programming X and Y from 0 to 20 mA, impedance

250 W

1 bipolar differential analog input ± 10 V, impedance 30 kW

1 voltage analog input ±10 V, impedance 30 kW, sampling time 2 ms

1 analog output configurable as:

voltage analog output 0…10 V c, minimum load impedance 470 W

current analog output 0…20 mA, maximum load impedance 800 W

2 relay outputs:

1 NC contact and 1 NO contact with common point

Minimum switching capacity 5 mA for 24 V c, maximum switching capacity 3 A on

resistive load, 2 A on inductive load for 250 V a or 30 V c

1 NC contact , maximum switching capacity 5 A on resistive load

6 Removable motor power terminal block (allows quick disconnect and re-connect

of motor cables during maintenance operations)

7 EMC mounting plate (integral part of the motor power terminal block 6). This

plate is supplied with a cable guide support, which can be used if required.

Standards and certifications (1)

Altivar Machine ATV320 drives have been developed to conform to the strictest

international standards and recommendations relating to industrial electrical control

devices (IEC), in particular:

IEC 61800-5-1

IEC 61800-3:

EMC immunity: IEC 61800-3, Environments 1 and 2

Conducted emission compliance:

- IEC 61800-3, category C2, with integrated EMC filter for

ATV320pppM2p,

ATV320U04N4p...U40N4p drives

- IEC 61800-3, category C2, with additional EMC filter for

ATV320pppM3C

drives

- IEC 61800-3, category C3, with integrated EMC filter for

ATV320U55N4B...

D15N4B drives

ISO/EN 13849-1/-2 category 3 (PL d)

IEC 61508 (parts 1 & 2)

IEC 60721-3-3 classes 3C3 and 3S2

Altivar Machine ATV320 drives are certified:

UL 508C / UL61800-5-1

CSA 22.2 N274

NOM

EAC

RCM

They are e marked according to the European low voltage (2014/35/UE) and EMC

(2014/30/UE) directives.

They also comply with environmental directives (RoHS).

(1) A complete list of certifications and characteristics is available on our website

GV2AP02 bảng dữ liệu(PDF) 12 Page - Schneider Electric

GV2AP02 bảng dữ liệu(HTML) 12 Page - Schneider Electric

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48

bảng dữ liệu tải về

Link URL