MPC5200 datasheet(10/80 Pages) FREESCALE

10 / 80 page

MPC5200 Data Sheet, Rev. 4

Electrical and Thermal Characteristics

Freescale Semiconductor

where N is the number of output pins switching in a group M, C is the capacitance per pin, VDD_IO is the

IO voltage swing, f is the switching frequency and PIOint is the power consumed by the unloaded IO stage.

The total power consumption of the MPC5200 processor must not exceed the value, which would cause

the maximum junction temperature to be exceeded.

Table 6. Power Dissipation

Core Power Supply (VDD_CORE)

SpecID

Mode

SYS_XTAL/XLB/PCI/IPG/CORE (MHz)

Unit

Notes

33/66/33/33/264

33/132/66/132/396

Typ

Operational

727.5

1080

1,2

NOTES:

Typical core power is measured at VDD_CORE = 1.5 V, Tj = 25 C

Operational power is measured while running an entirely cache-resident program with floating-point

multiplication instructions in parallel with a continuous PCI transaction via BestComm.

D5.1

Doze

—

600

1,3

Doze power is measured with the G2_LE core in Doze mode, the system oscillator, System PLL and Core PLL

are active, all other system modules are inactive

D5.2

Nap

—

225

1,4

Nap power is measured with the G2_LE core in Nap mode, the stem oscillator, System PLL and Core PLL are

active, all other system modules are inactive

D5.3

Sleep

—

225

1,5

Sleep power is measured with the G2_LE core in Sleep mode, the stem oscillator, System PLL and Core PLL

are active, all other system modules are inactive

D5.4

Deep-Sleep

52.5

1,6

Deep-Sleep power is measured with the G2_LE core in Sleep mode, the stem oscillator, System PLL, Core PLL

and all other system modules are inactive

D5.5

PLL Power Supplies (SYS_PLL_AVDD, CORE_PLL_AVDD)

Mode

Typ

Unit

Notes

Typical

Typical PLL power is measured at SYS_PLL_AVDD = CORE_PLL_AVDD = 1.5 V, Tj = 25 C

D5.6

Unloaded I/O Power Supplies (VDD_IO, VDD_MEM_IO8)

IO power figures given in the table represent the worst case scenario. For the mem_io rail connected to 2.5V the

IO power is expected to be lower and bounded by the worst case with VDD_MEM_IO connected to 3.3V.

Mode

Typ

Unit

Notes

Typical

Unloaded typical I/O power is measured in Deep-Sleep mode at VDD_IO = VDD_MEM_IOSDR= 3.3 V, Tj = 25 C

D5.7

Ptotal Pcore Panalog PIO

MPC5200 bảng dữ liệu(PDF) 10 Page - Freescale Semiconductor, Inc

MPC5200 bảng dữ liệu(HTML) 10 Page - Freescale Semiconductor, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80

bảng dữ liệu tải về

Link URL