ADP5140WACCZ-R7 datasheet(48/128 Pages) AD

tên linh kiện	ADP5140WACCZ-R7

Giải thích chi tiết về linh kiện	Power Management IC for Automotive Application

PDF	128 Pages

Scroll/Zoom	100%

nhà sản xuất	AD [Analog Devices]

Trang chủ	http://www.analog.com

Logo

48 / 128 page

ADP5140

Data Sheet

Rev. 0 | Page 48 of 128

REGULATOR 2

REGULATOR 5

REGULATOR 11

REGULATOR 1

REGULATOR 12

VIN

REGULATOR 3

REGULATOR 8

REGULATOR 6

REGULATOR 7

REGULATOR 9

REGULATOR 4

REGULATOR 10

VMDW

SPI_CMD1

(POWER-DOWN COMMAND)

RESET

STATUS

FAULT

Figure 90. Power-Down Sequence

SPI

The ADP5140 uses the SPI to communicate with the processor.

The ADP5140 is always the slave and has a single input and

output mode.

SPI Mode 0 and Mode 3 are supported in the ADP5140. In

Mode 0 (clock polarity (CPOL) = clock phrase (CPHA) = 0),

SCK is low when the clock is inactive. In Mode 3 (CPOL =

CPHA = 1), SCK is high when the clock is inactive. In both

modes, bits are always sampled at the rising edge of the clock

and driven at the falling edge of the clock. The ADP5140

detects which mode is used automatically when receiving bit

streams from the host.

Through the SPI, the processor can configure the ADP5140

functionalities and set the device parameters. The processor can

also read back the status of the ADP5140. Refer to the SPI

registers.

ADP5140WACCZ-R7 bảng dữ liệu(PDF) 48 Page - Analog Devices