PPC5605BAMLL4R datasheet(35/114 Pages) NXP

35 / 114 page

Electrical characteristics

MPC5607B Microcontroller Data Sheet, Rev. 10

NXP Semiconductors

The parameters listed in the following tables represent the characteristics of the device and its demands on

the system.

In the tables where the device logic provides signals with their respective timing characteristics, the

symbol “CC” for Controller Characteristics is included in the Symbol column.

In the tables where the external system must provide signals with their respective timing characteristics to

the device, the symbol “SR” for System Requirement is included in the Symbol column.

4.1

Parameter classification

The electrical parameters shown in this supplement are guaranteed by various methods. To give the

customer a better understanding, the classifications listed in Table 7 are used and the parameters are tagged

accordingly in the tables where appropriate.

NOTE

The classification is shown in the column labeled “C” in the parameter tables where

appropriate.

4.2

NVUSRO register

Bit values in the Non-Volatile User Options (NVUSRO) Register control portions of the device configuration, namely electrical

parameters such as high voltage supply and oscillator margin, as well as digital functionality (watchdog enable/disable after

reset).

For a detailed description of the NVUSRO register, please refer to the device reference manual.

4.2.1

NVUSRO[PAD3V5V] field description

The DC electrical characteristics are dependent on the PAD3V5V bit value. Table 8 shows how NVUSRO[PAD3V5V] controls

the device configuration.

Table 7. Parameter classifications

Classification tag

Tag description

Those parameters are guaranteed during production testing on each individual device.

Those parameters are achieved by the design characterization by measuring a statistically

relevant sample size across process variations.

Those parameters are achieved by design characterization on a small sample size from typical

devices under typical conditions unless otherwise noted. All values shown in the typical column

are within this category.

Those parameters are derived mainly from simulations.

Table 8. PAD3V5V field description1

1 See the device reference manual for more information on the NVUSRO register.

Value2

Description

High voltage supply is 5.0 V

High voltage supply is 3.3 V

PPC5605BAMLL4R bảng dữ liệu(PDF) 35 Page - NXP Semiconductors

PPC5605BAMLL4R bảng dữ liệu(HTML) 35 Page - NXP Semiconductors

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

bảng dữ liệu tải về

Link URL