56F8335 datasheet(97/160 Pages) FREESCALE

97 / 160 page

Resets

56F8335 Technical Data, Rev. 1

Freescale Semiconductor

Preliminary

5.6.30.7

IRQA State Pin (IRQA STATE)—Bit 2

This read-only bit reflects the state of the external IRQA pin.

5.6.30.8

IRQB Edge Pin (IRQB Edg)—Bit 1

This bit controls whether the external IRQB interrupt is edge- or level-sensitive. During Stop and Wait

modes, it is automatically level-sensitive.

•0 = IRQB interrupt is a low-level sensitive (default)

•1 = IRQB interrupt is falling-edge sensitive.

5.6.30.9

IRQA Edge Pin (IRQA Edg)—Bit 0

This bit controls whether the external IRQA interrupt is edge- or level-sensitive. During Stop and Wait

modes, it is automatically level-sensitive.

•0 = IRQA interrupt is a low-level sensitive (default)

•1 = IRQA interrupt is falling-edge sensitive.

5.7 Resets

5.7.1

Reset Handshake Timing

The ITCN provides the 56800E core with a reset vector address whenever RESET is asserted. The reset

vector will be presented until the second rising clock edge after RESET is released.

5.7.2

ITCN After Reset

After reset, all of the ITCN registers are in their default states. This means all interrupts are disabled except

the core IRQs with fixed priorities:

•

Illegal Instruction

•

SW Interrupt 3

•

HW Stack Overflow

•

Misaligned Long Word Access

•

SW Interrupt 2

•

SW Interrupt 1

•

SW Interrupt 0

•

SW Interrupt LP

These interrupts are enabled at their fixed priority levels.

56F8335 bảng dữ liệu(PDF) 97 Page - Freescale Semiconductor, Inc

56F8335 bảng dữ liệu(HTML) 97 Page - Freescale Semiconductor, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

bảng dữ liệu tải về

Link URL