EMC2302 datasheet(3/70 Pages) MICROCHIP

3 / 70 page

 2021 Microchip Technology Inc.

DS20006532A-page 3

EMC2301/2/3/5

1.0

ELECTRICAL CHARACTERISTICS

1.1

Electrical Specifications

Absolute Maximum Ratings †

Ambient Temperature Under Bias ...........................................................................................................-40°C to +125°C

Storage Temperature ..............................................................................................................................-55°C to +150°C

Voltage on VDD with respect to GND .............................................................................................................. -0.3V to 4V

Voltage on 5V tolerant pins (|V5VT_pin - VDD| with respect to GND) (see Note 1) ............................................ 0V to 3.6V

Voltage on 5V tolerant pins with respect to GND......................................................................................... -0.3V to 5.5V

Voltage on any other pin with respect to GND ....................................................................................-0.3V to VDD +0.3V

Package Thermal Resistance - Junction to Ambient (θJA) for QFN-16.................................................................40°C/W

Package Thermal Resistance - Junction to Ambient (θJA) for QFN-12.................................................................50°C/W

Package Thermal Resistance - Junction to Ambient (θJA) for MSOP-10............................................................132°C/W

Package Thermal Resistance - Junction to Ambient (θJA) for MSOP-8..............................................................141°C/W

ESD Rating, All Pins, HBM......................................................................................................................................... 2 kV

Note 1: For the 5V tolerant pins that have a pull-up resistor (SMCLK, SMDATA, TACH and ALERT), the pull-up volt-

age must not exceed 3.6V when the device is unpowered.

† Notice: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the

device. This is a stress rating only and functional operation of the device at those or any other conditions above those

indicated in the operational listings of this specification is not implied. Exposure to maximum rating conditions for

extended periods may affect device reliability.

EMC2302 bảng dữ liệu(PDF) 3 Page - Microchip Technology

EMC2302 bảng dữ liệu(HTML) 3 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70

bảng dữ liệu tải về

Link URL