MBM29PL64LM datasheet(35/69 Pages) SPANSION

35 / 69 page

MBM29PL64LM90/10

s ABSOLUTE MAXIMUM RATINGS

*1 : Voltage is defined on the basis of VSS = GND = 0 V.

*2 : Minimum DC voltage on input or I/O pins is –0.5 V. During voltage transitions, input or I/O pins may undershoot

VSS to –0.2 V for periods of up to 20 ns. Maximum DC voltage on input or I/O pins is VCC +0.5 V. During voltage

transitions, input or I/O pins may overshoot to VCC +2.0 V for periods of up to 20 ns

*3 : Minimum DC input voltage is –0.5 V. During voltage transitions, these pins may undershoot VSS to –0.2 V for

periods of up to 20 ns.Voltage difference between input and supply voltage ( VIN–VCC) dose not exceed to

+9.0 V. Maximum DC input voltage is +12.5 V which may overshoot to +14.0 V for periods of up to 20 ns .

WARNING: Semiconductor devices can be permanently damaged by application of stress (voltage, current,

temperature, etc.) in excess of absolute maximum ratings. Do not exceed these ratings.

s RECOMMENDED OPERATING RANGES*1

*1 : Operating ranges define those limits between which the functionality of the device is guaranteed.

*2 : Voltage is defined on the basis of VSS = GND = 0 V.

*3 : VCC and VCCQ supply voltage must be on the same level.

*4 : VCCQ supply voltage is only for MBM29PL64LMxxPCN : 56 pin TSOP

WARNING: The recommended operating conditions are required in order to ensure the normal operation of the

semiconductor device. All of the device’s electrical characteristics are warranted when the device is

operated within these ranges.

Always use semiconductor devices within their recommended operating condition ranges. Operation

outside these ranges may adversely affect reliability and could result in device failure.

No warranty is made with respect to uses, operating conditions, or combinations not represented on

the data sheet. Users considering application outside the listed conditions are advised to contact their

FUJITSU representatives beforehand.

Parameter

Symbol

Rating

Unit

Min

Max

Storage Temperature

Tstg

–55

+125

°C

Ambient Temperature with Power Applied

–20

+85

°C

Voltage with Respect to Ground All Pins Except

A9, OE, and RESET *1,*2

VIN, VOUT

–0.5

VCC +0.5

Power Supply Voltage *1

VCC

–0.5

+4.0

A9, OE, and RESET *1,*3

VIN

–0.5

+12.5

WP/ACC *1,*3

VACC

–0.5

+12.5

Parameter

Symbol

Value

Unit

Min

Max

Ambient Temperature

–20

+70

°C

–20

+85

VCC Supply Voltage *2, *3

VCC

+3.0

+3.6

VCCQ Supply Voltage *2, *3 *4

VCCQ

VCC

MBM29PL64LM bảng dữ liệu(PDF) 35 Page - SPANSION

MBM29PL64LM bảng dữ liệu(HTML) 35 Page - SPANSION

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69

bảng dữ liệu tải về

Link URL