P89LPC915FDH datasheet(56/72 Pages) PHILIPS

56 / 72 page

Philips Semiconductors

P89LPC915/916/917

8-bit microcontrollers with accelerated two-clock 80C51 core

Product data

Rev. 04 — 17 December 2004

56 of 72

9397 750 14397

10. Limiting values

[1]

The following applies to Limiting values:

a) Stresses above those listed under Table 12 may cause permanent damage to the device. This is a stress rating only and functional

operation of the device at these or any conditions other than those described in Table 13 “DC electrical characteristics”, Table14“AC

characteristics”and Table 15 “AC characteristics” of this speciﬁcation are not implied.

b) This product includes circuitry speciﬁcally designed for the protection of its internal devices from the damaging effects of excessive

static charge. Nonetheless, it is suggested that conventional precautions be taken to avoid applying greater than the rated maximum.

c) Parameters are valid over operating temperature range unless otherwise speciﬁed. All voltages are with respect to VSS unless

otherwise noted.

Table 12:

Limiting values

In accordance with the Absolute Maximum Rating System (IEC 60134).[1]

Symbol

Parameter

Conditions

Min

Max

Unit

Tamb(bias)

operating bias ambient temperature

−55

+125

°C

Tstg

storage temperature range

−65

+150

°C

voltage on any pin to VSS

−0.5

+5.5

IOH(I/O)

high-level output current per I/O pin

IOL(I/O)

low-level output current per I/O pin

II/O(tot)(max)

maximum total I/O current

120

Ptot(pack)

total power dissipation per package

based on package heat

transfer, not device power

consumption

1.5

P89LPC915FDH bảng dữ liệu(PDF) 56 Page - NXP Semiconductors

P89LPC915FDH bảng dữ liệu(HTML) 56 Page - NXP Semiconductors

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72

bảng dữ liệu tải về

Link URL