| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
P89LPC915FDH bảng dữ liệu(PDF) 55 Page - NXP Semiconductors |
|
|
|||||||||||||||||||||||||||||
P89LPC915FDH bảng dữ liệu(HTML) 55 Page - NXP Semiconductors |
|
55 / 72 page ![]() Philips Semiconductors P89LPC915/916/917 8-bit microcontrollers with accelerated two-clock 80C51 core Product data Rev. 04 — 17 December 2004 55 of 72 9397 750 14397 © Koninklijke Philips Electronics N.V. 2004. All rights reserved. VSS, RST, clock, and data signals) needs to be available to interface your application to a commercial programmer in order to use this feature. Additional details may be found in the P89LPC915/916/917 User’s Manual. 9.28.6 In-application programming (IAP-Lite) In-Application Programming is performed in the application under the control of the microcontroller’s firmware. The IAP-Lite facility consists of internal hardware resources to facilitate programming and erasing. The Philips In-Application Programming Lite has made in-application programming in an embedded application possible without additional components. This is accomplished through the use of four SFRs consisting of a control/status register, a data register, and two address registers. Additional details may be found in the P89LPC915/916/917 User’s Manual. 9.28.7 Using flash as data storage The Flash code memory array of this device supports individual byte erasing and programming. Any byte in the code memory array may be read using the MOVC instruction, provided that the sector containing the byte has not been secured (a MOVC instruction is not allowed to read code memory contents of a secured sector). Thus any byte in a non-secured sector may be used for non-volatile data storage. 9.28.8 User configuration bytes Some user-configurable features of the P89LPC915/916/917 must be defined at power-up and therefore cannot be set by the program after start of execution. These features are configured through the use of the Flash byte UCFG1. Please see the P89LPC915/916/917 User’s Manual for additional details. 9.28.9 User sector security bytes There are eight User Sector Security Bytes, each corresponding to one sector. Please see the P89LPC915/916/917 User’s Manual for additional details. |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |