PIC12F508 datasheet(67/98 Pages) MICROCHIP

67 / 98 page

 2004 Microchip Technology Inc.

Preliminary

DS41236A-page 65

PIC12F508/509/16F505

9.9

MPLAB ICE 2000

High Performance Universal

In-Circuit Emulator

The MPLAB ICE 2000 universal in-circuit emulator is

intended to provide the product development engineer

with a complete microcontroller design tool set for

PICmicro microcontrollers. Software control of the

MPLAB ICE 2000 in-circuit emulator is advanced by

the MPLAB Integrated Development Environment,

which allows editing, building, downloading and source

debugging from a single environment.

The MPLAB ICE 2000 is a full-featured emulator sys-

tem with enhanced trace, trigger and data monitoring

features. Interchangeable processor modules allow the

system to be easily reconfigured for emulation of differ-

ent processors. The universal architecture of the

MPLAB ICE in-circuit emulator allows expansion to

support new PICmicro microcontrollers.

The MPLAB ICE 2000 in-circuit emulator system has

been designed as a real-time emulation system with

advanced features that are typically found on more

expensive development tools. The PC platform and

Microsoft® Windows 32-bit operating system were

chosen to best make these features available in a

simple, unified application.

9.10

MPLAB ICE 4000

High Performance Universal

In-Circuit Emulator

The MPLAB ICE 4000 universal in-circuit emulator is

intended to provide the product development engineer

with a complete microcontroller design tool set for high-

end PICmicro microcontrollers. Software control of the

MPLAB ICE in-circuit emulator is provided by the

MPLAB Integrated Development Environment, which

allows editing, building, downloading and source

debugging from a single environment.

The MPLAB ICD 4000 is a premium emulator system,

providing the features of MPLAB ICE 2000, but with

increased emulation memory and high speed perfor-

mance for dsPIC30F and PIC18XXXX devices. Its

advanced emulator features include complex triggering

and timing, up to 2 Mb of emulation memory, and the

ability to view variables in real-time.

The MPLAB ICE 4000 in-circuit emulator system has

been designed as a real-time emulation system with

advanced features that are typically found on more

expensive development tools. The PC platform and

Microsoft Windows 32-bit operating system were cho-

sen to best make these features available in a simple,

unified application.

9.11

MPLAB ICD 2 In-Circuit Debugger

Microchip’s In-Circuit Debugger, MPLAB ICD 2, is a

powerful,

low

cost,

run-time

development

tool,

connecting to the host PC via an RS-232 or high speed

USB interface. This tool is based on the FLASH

PICmicro MCUs and can be used to develop for these

and other PICmicro microcontrollers. The MPLAB

ICD 2 utilizes the in-circuit debugging capability built

into the FLASH devices. This feature, along with

Microchip’s In-Circuit Serial ProgrammingTM (ICSPTM)

protocol, offers cost effective in-circuit FLASH debug-

ging from the graphical user interface of the MPLAB

Integrated Development Environment. This enables a

designer to develop and debug source code by setting

breakpoints, single-stepping and watching variables,

CPU status and peripheral registers. Running at full

speed enables testing hardware and applications in

real-time. MPLAB ICD 2 also serves as a development

programmer for selected PICmicro devices.

9.12

PRO MATE II Universal Device

Programmer

The PRO MATE II is a universal, CE compliant device

programmer with programmable voltage verification at

VDDMIN and VDDMAX for maximum reliability. It features

an LCD display for instructions and error messages

and a modular detachable socket assembly to support

various package types. In Stand-Alone mode, the

PRO MATE II device programmer can read, verify, and

program PICmicro devices without a PC connection. It

can also set code protection in this mode.

9.13

PICSTART Plus Development

Programmer

The PICSTART Plus development programmer is an

easy-to-use, low cost, prototype programmer. It con-

nects to the PC via a COM (RS-232) port. MPLAB

Integrated Development Environment software makes

using the programmer simple and efficient. The

PICSTART Plus development programmer supports

most PICmicro devices up to 40 pins. Larger pin count

devices, such as the PIC16C92X and PIC17C76X,

may be supported with an adapter socket. The

PICSTART Plus development programmer is CE

compliant.

PIC12F508 bảng dữ liệu(PDF) 67 Page - Microchip Technology

PIC12F508 bảng dữ liệu(HTML) 67 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98

bảng dữ liệu tải về

Link URL