AS39513 datasheet(50/108 Pages) AMSCO

50 / 108 page

Page 50

ams Datasheet

Document Feedback

[v1-10] 2018-Apr-25

AS39513 − Detailed Description

TLOLIM[7:0] – Fourth threshold to use for limit checks during

temperature measurements. See the section on Limit Check

Algorithm above.

TXHICNT[7:0] – Counter for the number of times that the first

threshold condition was met during limit checks of the

temperature measurement. If this count is non-zero, the over

limit count flag, OVLIM, will be set.

TXLOCNT[7:0] – Counter for the number of times that the

second threshold condition was met (but not the first

condition) during limit checks of the temperature

measurement. If this count is non-zero, the over limit count flag,

OVLIM, will be set.

THICNT[7:0] – Counter for the number of times that the third

threshold condition was met (but not the first or second

condition) during limit checks of the temperature

measurement.

TLOCNT[7:0] – Counter for the number of times that the fourth

threshold condition was met (but not the first, second, or third

condition) during limit checks of the temperature

measurement.

THIMAX[7:0] – Maximum count for the number of times that

the third threshold condition was met (but not the first or

second condition) during limit checks of the external sensor

measurement. If THICNT > THIMAX, then the over limit count

flag, OVLIM, will be set.

TLOMAX[7:0] – Maximum count for the number of times that

the fourth threshold condition was met (but not the first,

second, or third condition) during limit checks of the external

sensor measurement. If TLOCNT > TLOMAX, then the over limit

count flag, OVLIM, will be set.

AS39513 bảng dữ liệu(PDF) 50 Page - ams AG