AS39513 datasheet(85/108 Pages) AMSCO

85 / 108 page

ams Datasheet

Page 85

[v1-10] 2018-Apr-25

Document Feedback

AS39513 − Detailed Description

Lock All Blocks Command

Lock All Blocks Command Request:

Lock All Blocks Command Reply:

The lock all blocks command sets the LKALL bit in System

EEPROM to mark as “read-only” the entire Measurement area of

the EEPROM. (The Application area is not locked by this bit.) No

access passwords need to be set prior to using this command.

The OPTION flag controls the response timing according to the

ISO 15693 standard, section 10.4.37.

Set Mode Command

Set Mode Command Request:

Set Mode Command Reply:

The Set Mode command can change the mode of the chip

directly to ACTIVE mode (where logging events can take place)

or initially to a WAIT mode (where there is a programmed delay

before entering ACTIVE mode). This is the key command to start

logging.

SOF

Flags

Command

IC Mfg.

UID

CRC

EOF

NFLAGS

0xA6

0x36

64 bits

16 bits

SOF

Flags

CRC

EOF

RFLAGS

16 bits

7. For more information, please refer to the respective section of ISO/IEC 15693-3 specification (second edition, 2009-04-15).

SOF

Flags

Command

IC Mfg.

UID

Mode

CRC

EOF

NFLAGS

0xA8

0x36

64 bits

8 bits

16 bits

SOF

Flags

CRC

EOF

RFLAGS

16 bits

AS39513 bảng dữ liệu(PDF) 85 Page - ams AG

AS39513 bảng dữ liệu(HTML) 85 Page - ams AG

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

bảng dữ liệu tải về

Link URL