| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
ST25DV04K bảng dữ liệu(PDF) 31 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
ST25DV04K bảng dữ liệu(HTML) 31 Page - STMicroelectronics |
|
31 / 220 page ![]() DocID027603 Rev 4 31/220 ST25DV04K ST25DV16K ST25DV64K Memory management 219 4.3 System configuration area In addition to EEPROM user memory, ST25DVxxx includes a set of static registers located in the system configuration area memory (EEPROM nonvolatile registers). Those registers are set during device configuration (i.e.: area extension), or by the application (i.e.: area protection). Static registers content is read during the boot sequence and define basic ST25DVxxx behavior. In RF, the static registers located in the system configuration area can be accessed via dedicated Read Configuration and Write Configuration commands, with a pointer acting as the register address. The RF configuration security session must first be open, by presenting a valid RF configuration password, to grant write access to system configuration registers. The system configuration area write access by RF can also be deactivated by I2C host. Table 6. ENDA2(1) RF Command Read Configuration (cmd code A0h) @07h Write Configuration (cmd code A1h) @07h Type R always, W if RF configuration security session is open and configuration not locked I2C Address E2 = 1, 0007h Type R always, W if I2C security session is open Bit Name Function Factory Value b7-b0 ENDA2 End Area 2 = 8 x ENDA2 + 7 when expressed in blocks (RF) End Area 2 = 32*ENDA2 + 31 when expressed in bytes (I2C) ST25DV04K-XX: 0Fh ST25DV16K-XX: 3Fh ST25DV64K-XX: FFh 1. Refer to Table 8: System configuration memory map for the ENDA2 register. Table 7. ENDA3(1) RF Command Read Configuration (cmd code A0h) @09h Write Configuration (cmd code A1h) @09h Type R always, W if RF configuration security session is open and configuration not locked I2C Address E2 = 1, 0009h Type R always, W if I2C security session is open Bit Name Function Factory Value b7-b0 ENDA3 End Area 3 = 8 x ENDA3 + 7 when expressed in blocks (RF) End Area 3 = 32 x ENDA3 + 31 when expressed in bytes (I2C) ST25DV04K-XX: 0Fh ST25DV16K-XX: 3Fh ST25DV64K-XX: FFh 1. Refer to Table 8: System configuration memory map for the ENDA3 register. |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |