STM32L431 datasheet(87/200 Pages) STMICROELECTRONICS

tên linh kiện	STM32L431

Giải thích chi tiết về linh kiện	RTC with HW calendar, alarms and calibration

PDF	200 Pages

Scroll/Zoom	100%

nhà sản xuất	STMICROELECTRONICS [STMicroelectronics]

Trang chủ	http://www.st.com

Logo

87 / 200 page

DocID028800 Rev 1

87/200

STM32L431xx

Electrical characteristics

168

6.3.5

Supply current characteristics

The current consumption is a function of several parameters and factors such as the

operating voltage, ambient temperature, I/O pin loading, device software configuration,

operating frequencies, I/O pin switching rate, program location in memory and executed

binary code.

The current consumption is measured as described in Figure 18: Current consumption

measurement scheme.

Typical and maximum current consumption

The MCU is placed under the following conditions:

•

All I/O pins are in analog input mode

•

All peripherals are disabled except when explicitly mentioned

•

The Flash memory access time is adjusted with the minimum wait states number,

depending on the fHCLK frequency (refer to the table “Number of wait states according

to CPU clock (HCLK) frequency” available in the RM0392 reference manual).

•

When the peripherals are enabled fPCLK = fHCLK

The parameters given in Table 25 to Table 38 are derived from tests performed under

ambient temperature and supply voltage conditions summarized in Table 21: General

operating conditions.

STM32L431 bảng dữ liệu(PDF) 87 Page - STMicroelectronics