STM32F358XC datasheet(105/134 Pages) STMICROELECTRONICS

105 / 134 page

DocID025540 Rev 4

105/134

STM32F358xC

Electrical characteristics

118

SINAD

Signal-to-

noise and

distortion

ratio

ADC clock freq.

≤ 72 MHz,

Sampling freq.

≤ 5 Msps,

1.8V

≤ VDDA, VREF+ ≤ 3.6 V

100-pin package

Single Ended

Fast channel 5.1 Ms

Slow channel 4.8 Ms

Differential

Fast channel 5.1 Ms

Slow channel 4.8 Ms

SNR

Signal-to-

noise ratio

Single Ended

Fast channel 5.1 Ms

Slow channel 4.8 Ms

Differential

Fast channel 5.1 Ms

Slow channel 4.8 Ms

THD

Total

harmonic

distortion

Single Ended

Fast channel 5.1 Ms

-74

Slow channel 4.8 Ms

-74

Differential

Fast channel 5.1 Ms

-78

Slow channel 4.8 Ms

-76

1. ADC DC accuracy values are measured after internal calibration.

2. ADC accuracy vs. negative Injection Current: Injecting negative current on any analog input pins should be avoided as this

significantly reduces the accuracy of the conversion being performed on another analog input. It is recommended to add a

Schottky diode (pin to ground) to analog pins which may potentially inject negative current.

Any positive injection current within the limits specified for IINJ(PIN) and ΣIINJ(PIN) in Section 6.3.13 does not affect the ADC

accuracy.

3. Better performance may be achieved in restricted VDDA, frequency and temperature ranges.

4. Data based on characterization results, not tested in production.

Table 67. ADC accuracy, 100-pin packages(1)(2)(3) (continued)

Symbol Parameter

Conditions

Min(4) Max(4) Unit

STM32F358XC bảng dữ liệu(PDF) 105 Page - STMicroelectronics

STM32F358XC bảng dữ liệu(HTML) 105 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

bảng dữ liệu tải về

Link URL